01737 767493 info@jbj.co.uk www.jbj.co.uk www.jbj.co.uk/pressure-intensifiers.html The ScanWill compact hydraulic pressure intensifiers offer an easy, energy-saving, safe and costefficient solution to achieving a higher output pressure from an existing low-pressure power source. Low pressure supplied to the inlet port eg: 15 - 200 bar / 218 - 2,900 psi ~ is transformed to a higher pressure at the outlet port ~ from 20 - 4,000 bar / 290 - 58,000 psi. ScanWill’s pressure intensifiers are offered in cast iron and steel, with a chrome finish, as well as in stainless steel for the oil & gas sector. These pressure intensifiers are based on a piston principle, where a larger diameter piston pushes a smaller diameter piston, thus increasing the pressure to a factor equal to the ratio: the larger diameter area divided by smaller diameter area. The outlet pressure will always be proportionate to the supplied pressure. The diagram shows the basic principle of the pressure intensifiers, consisting of a piston arrangement, a Piston Control Valve PCV, Check Valves CV1 & CV2 and the Pilot Operated Check Valve POV. exceptional mechanical & fluid power expertise ESTABLISHED 1974 ACHIEVING HIGHER OUTPUT PRESSURE FROM EXISTING LOW-PRESSURE POWER SOURCE
RkJQdWJsaXNoZXIy NzQyNjQ=