SCREW PUMPS Screw Pumps 2SP Series Technical Specifications 40 Non lubricating low and medium viscosity and corrosive fluids Suitable for water, light chemical and petrochemical products, fuel and heavy oils. Maximum delivery pressure (continuous) 16 bar at 1000 to 3600 rpm Installation Data Installation: Indoor or Outdoor. Environment: Marine, Industrial. Application: Cargo, transfer, lube system, stripping. Operating Data Handled fluid: Fuel oil HFO - DO - LSMGO hydraulic and Lube oils. Viscosity range: From 0.7 to 15.000 cSt Pump speed: From 750 to 3600 rpm. * Rotation (viewed from coupling end): CW (Std version; CCW on demand). Technical Characteristics 3 Flow rate: Up to 20,000 LPM - 1200 m /h. Suction pressure: From - 0,5 to 10 bar. Delivery pressure: Up to 40 bar. Operating temperature range: * From 0 to 300 °C Seal: Mechanical seal. Bearing type: Radial ball on main shaft. Bearing lubrication: Dependent on application. Mounting arrangement: Horizontal or vertical (with foot). Inlet & Outlet connection: DIN standard (ANSI on request). Materials Casing/Flanges: or carbon steel. GGG-40 Screws: Nitrided steel * O-rings: Viton ® Surface protection: On request. *Contact jbj Techniques technical office for different values, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk www.jbj.co.uk/screwpumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=