SCREW PUMPS Screw Pumps PHS Series Specifications 17 Installation Data Installation: Indoor or Outdoor. Environment: Marine, Industrial. Application: Separator, transfer, booster, feeder, fuel supply, lubricating. Operating Data Handled fluid: Fuel oil HFO - DO - LSMG0 - Hydraulic and Lube oils. Viscosity range: From 1,2 to 5000 cSt. Pump speed: From 750 to 3600 rpm * Rotation (viewed from coupling end): CW (Std version; CCW on demand). Technical Characteristics 3 Flow rate: 170 lpm -10.2 m /h. Suction pressure: From - 0,5 to 10 bar. Delivery pressure: Up to 16 bar (from 1000 to 3600 rpm). Operating temperature range: From 0 to 150 °C * Shaft seal: Mechanical seal. Bearing type: Radial ball on main shaft. Bearing lubrication: Lubricated for life. Mounting arrangement: Horizontal or vertical mounting. Inlet & Outlet connection: Special version. Materials Casing/Flanges: Modular cast Iron GGG40. Screws: Nitrided steel. O-rings: Viton ®. Surface protection: On request. *Contact jbj Techniques technical office for different values, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk For hydraulic oils, lubricating oils Versions for fuel oils (all types) Maximum delivery pressure (continuous) = 16 bar Flow rates up to 160 L/min With built-in safety valve, adjustable from the outside, also during pump operation. www.jbj.co.uk/screwpumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=