Screw Pumps PDK Series Specifications SCREW PUMPS 15 For hydraulic oils, lubricating oils. Max. delivery pressure (continuous): 16 bar Standard built in relief valve setting: 10 bar (other on request) Main field of application: Lubrication circuits, filtration and cooling systems, low pressure auxiliary circuits Installation Data Installation Indoor or Outdoor Environment Industrial Amb. Temperature Min/Max -5°C (CS) and -40°C (LTCS) , storage only / 60°C * Operating Conditions Fluids: lubricating oils, Hydraulic oil, Aeronautical fluids. Solid content: 0% * Viscosity range: between 20 and 500 cSt * Speed: between 750 and 3600 rpm * * Rotation (shaft view): clockwise Technical Characteristics 3 Flow rate: between 80 and 460 lpm (between 4.8 and 27.6 m /h; between 21.2 and 121.6 GPM) * Suction pressure: 2 barg (30 psi) MAX * Delivery pressure: 16 barg (233 psi) MAX * Operating temperature: between 0 and 100 °C * Shaft seal: Mechanical Bearing: radial ball Bearing lubrication: pumped fluid Drive: AC or DC motor Construction shape: Horizontal or vertical IN/OUT: BSP UNI DIN EN1092-1 Safety valve: Built on, adjustable between 2-16 barg or set calibration Materials Body/Flange: Aluminium * Set of 3 screws: Carbon steel * Set of 3 screws: Carbon steel O-rings: Viton ® Specialist paint finishes: On request *Contact jbj Techniques technical office for different values, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk For hydraulic oils, lubricating oils Flow rate up to 460 L/min Maximum delivery pressure (continuous) 16 bar Standard valve calibration 10 bar (other on request) www.jbj.co.uk/screwpumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=