www.jbj.co.uk/couplings.html #DriveLineHarmony ® SERLOCK To disassemble: 1) Disassemble the tightening screws. 2) Insert the screws in the threaded disassembly holes, tightening them until the tapered bushing is released. In order to remove the outer ring, if necessary: 3) After having removed the inner bushing, loosen the set screws. 4) Keeping the loosened set screws in place, position the inner bushing rotated 30° in relation to the original position. 5) Insert the screws and tighten them gradually until the inner ring is released. ® SERLOCK 80 Order form SL F10 ® SL: SERLOCK F...: bore diameter (mm) Size 1108 Dimensions and performances of standard types For different bore, sizes, or hollow shaft application, please contact jbj Techniques Limited technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk Shaft tolerance h8 or better if not otherwise specified, are shown in mm dimensions. Performances Dimensions (mm) Screws Setscrews ® SERLOCK 1108 Type Performances Dimensions (mm) Screws Setscrews ® SERLOCK 1210 Type d H H1 H2 D M (Nm) F (N) No. Type M Key No. Type M Key T ax s s SL1210F14 14 25 37,5 43,5 49 246 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F15 15 25 37,5 43,5 49 263 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F16 16 25 37,5 43,5 49 281 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F18 18 25 37,5 43,5 49 316 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F19 19 25 37,5 43,5 49 333 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F20 20 25 37,5 43,5 49 351 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F22 22 25 37,5 43,5 49 386 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F24 24 25 37,5 43,5 49 421 35100 6 M6 14 5 2 3/8 W 14 5 SL1210F25 25 25 37,5 43,5 49 438 35100 6 M6 14 5 2 3/8 W 14 5 Dimensions and Performances of Standard Types Ø Ø d H H1 H2 D M (Nm) F (N) No. Type M Key No. Type M Key T ax s s SL1108F12 12 20 29,5 33,5 39 109 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F14 14 20 29,5 33,5 39 128 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F15 15 20 29,5 33,5 39 137 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F16 16 20 29,5 33,5 39 146 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F18 18 20 29,5 33,5 39 164 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F19 19 20 29,5 33,5 39 173 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F20 20 20 29,5 33,5 39 182 18200 6 M4 4,9 3 2 1/4 W 4,9 3 SL1108F22 22 20 29,5 33,5 39 201 18200 6 M4 4,9 3 2 1/4 W 4,9 3
RkJQdWJsaXNoZXIy NzQyNjQ=