4 #DriveLineHarmony Rupex Series Introduction Torsionally Flexible Couplings The motor torque is transmitted to the hub on the drive side via the shaft-hub connection, which is mostly designed as a keyway connection. With the aid of elastomer elements mounted on steel pins, the torque is conducted to the hub on the output side. The hub on the output side further transmits the torque to the driven machine or a gear unit located in between. Because of the primarily compression-loaded elements, the coupling has a progressive torsional stiffness. Power Ratings 105 120 200 200 5 13 21 1 0.21 0.12 144 300 500 500 15 43 64 1 0.25 0.1 178 570 950 950 31 85 130 1.5 0.29 0.09 Function Technical specifications Rated Torque for Buffer Type Torsional Stiffness at 50%Capacity Assembly Permitted Shaft Misalignment 1) Utilization for Buffer Type at n = 1500rpm Size 65 ShoreA 80 ShoreA 90 ShoreA 65 ShoreA 80 ShoreA 90 ShoreA Gap Radial Angle Dimension T T T C C C ΔS ΔK ΔK KN KN KN Tdyn 50% Tdyn 50% Tdyn 50% r w Nm Nm Nm kNm/rad kNm/rad kNm/rad mm mm Degree 125 210 350 350 9 25 37 1 0.23 0.11 162 450 750 750 20 55 83 1.5 0.27 0.1 198 780 1300 1300 43 123 187 1.5 0.3 0.09 228 1300 2200 2200 65 184 270 1.5 0.34 0.09 252 1650 2750 2750 92 256 380 1.5 0.36 0.08 285 2600 4300 4300 141 390 560 1.5 0.4 0.08 320 3300 5500 5500 195 540 790 1.5 0.43 0.08 400 7500 12500 12500 410 1130 1710 1.5 0.52 0.07 450 11000 18500 18500 570 1600 2380 1.5 0.57 0.07 500 15000 25000 25000 860 2350 3600 1.5 0.62 0.07 360 4700 7800 7800 276 610 940 1.5 0.48 0.08 560 23500 39000 39000 1130 3070 4700 2 0.68 0.07 630 31000 52000 52000 1640 4600 7400 2 0.75 0.07 710 50000 84000 84000 2560 7200 10900 2 0.84 0.07 1120 160000 270000 270000 9800 27300 44000 2.5 1.26 0.06 1600 450000 750000 750000 37000 103000 160000 3 1.76 0.06 For fitting, the maximum gap dimension of S max. = S + ΔS and the minimum gap dimension of S min. = S – ΔS are permitted. 1800 585000 975000 975000 48000 133000 208000 4 1.96 0.06 T = 4 ⋅ T KOL KN For additional information on the allowable shaft misalignment, please refer to the operating instructions. For maximum coupling torque: 900 90000 150000 150000 5200 14300 22500 2.5 1.03 0.07 2000 780000 1300000 1300000 73000 201000 314000 4 2.17 0.06 For coupling fatigue torque: 800 66000 110000 110000 3900 10700 16700 2 0.93 0.07 1250 205000 345000 345000 14000 39000 62000 2.5 1.39 0.06 1400 320000 530000 530000 22800 62000 97000 3 1.55 0.06 1) The maximum speed for the respective type must be noted. T = 0,20 ⋅ T KW KN 1000 115000 195000 195000 7700 21300 33000 2.5 1.14 0.07 Note For overload torque: T = 3,0 ⋅ T Kmax KN www.jbj.co.uk/couplings.html#flender
RkJQdWJsaXNoZXIy NzQyNjQ=