an excellence in engineering 01737 767493 info@jbj.co.uk www.jbj.co.uk quality products for mechanical & fluid power - registered in England No: 1185469 - jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/E requirements You Tube www.jbj.co.uk/ .html splittergearboxes Driveline Harmony jbj Techniques 'AM' splitter gearboxes (or multiple PTO) are available in a number of mounting formats with various increasing and decreasing ratios. Maximum input torques up to 5,600Nm can be accepted as standard whilst higher powers can be accommodated by the use of oil cooling. All units can be supplied with either hydraulically or mechanically actuated clutch units. jbj Techniques can also offer specialist design and manufacture for units outside of the standard range. The pump drives range of equipment allows a single or a multiple of pumps to be driven from a single prime mover. Single pump drives allow a pump to be close coupled to a diesel engine that has a flywheel and flywheel housing in accordance with SAE standards (non standard can also be accommodated). Supplied in a kit format consisting of a bellhousing fully machined to suit the particular pump mounting and a flexible coupling to suit the engine flywheel and particular pump shaft. Multiple pump drives allow two or more pumps to be driven from a single prime mover. Available in a number of mounting formats, sizes and increasing and decreasing speed ratios. All models may be close coupled directly to the prime mover (Model B) or may be fitted with an over-centre clutch (except AM 365 and AM 480) for close coupling (model BD) or for independent mounting (model BDS). The multiple pump drive units are constructed from:- cast iron casings. » straight tooth gears case hardened and ground, » shaved on AM216, AM320, AM220, AM330 series. ball bearings. » case hardened shafts. » Viton seals on input shafts. » The input shaft is splined to the primary drive gear which transmits the drive to the secondary gear on whose axis drives the pump. The direction of rotation is therefore opposite from input to output. www.jbj.co.uk/splittergearboxes.html
RkJQdWJsaXNoZXIy NzQyNjQ=