HP1200 The HP1200 is an oil-filled, multiple disc, hydraulically-actuated self-adjusting clutch. The HP1200 has been developed with a number of unique features that offer reliability, productivity and power . . . . » Hydraulically actuated and self-adjusting wet clutch. » Suitable for in-line and side-load applications. » Advanced control system for smooth engagement. » Remote actuation via J1939 or switch input. » No pilot bearing. » High side load capability. » Maximum power rating 927 kW (1243 hp) @ 1800 rpm. » Two towers with two pump pads each. 298 kW (400 hp) maximum capacity per tower. 410 kW (550 hp) maximum capacity for both towers. » Available pump pads: SAE “A”, SAE “B”, SAE “C”, SAE “D”, SAE “E”. » Pump tower rotatable by 0°/45°/90° CW/CCW. » Optional 0.86:1 speed increase on pump tower. » SAE 0 input housing. » SAE 18 input coupling. » Optional integrated reservoir. » Standard charge/lube pump included. HPTO 140 / HPTO 244 / HPTO 366 This series of compact and lightweight power take offs incorporates a hydraulically-operated clutch. Advantages include improved reliability, increased efficiency, longer lifespan and lower maintenance costs. » Self Adjustment (no more clutch adjustments). » Remote Control (Electric or Mechanical). » Elimination of the Pilot Bearing. » Soft and progressive starts of the load. Designed for: Stone crushers, wood chippers, grinders, marine drives (main propulsion and auxiliaries) and various centrifugal pumps, fans and blowers. PFI-60 and PFI-120 These power take offs contain an integral bi-directional oil pump, integral pressure relief valve and SAE pump mount or keyed shaft output. PFI-60 » 205 kW (275 hp) capability. » 12 or 24 Volt DC solenoid. » SAE 3, 2 and 1 pump pad configurations. » 1000 kg side load capability. PFI-120 » 380 kW (510 hp) capability. » 12 or 24 Volt DC solenoid. » SAE 3, 2 and 1 pump pad configurations. » 1000 kg side load capability. Designed for: Direct engine mounting or mounted to AM pump drive and compact applications. Free standing clutches of the multiple plate, oil bath type. These clutches are particularly suited to arduous applications and are capable of withstanding high radial loads. The PFI 60 and PFI 120 are manufactured with input and output shafts. The PFI 60P and PFI120P are intended for hydraulic pump direct connection with the same pump adaptor flanges and couplings as on AM 230 - 450 pump drives which means the possibility to fit a large number of pumps with standard components. .html al-power-conversion.html in engineering
RkJQdWJsaXNoZXIy NzQyNjQ=