Hydraulic power take-off units Available in side-load straddle-bearing clutched models, in-line clutched and non-clutched models. For similar applications as the mechanical PTOs. Hydraulic clutches can be used wherever a disconnect is required between driven equipment and the prime mover. Ideally suited for applications such as: » Centrifugal pumps » Waterjets » Propellors » Generators » Hydraulic pumps » Agitators » Bow thrusters » Winches » Horizontal grinders » Blowers » Compressors » Conveyors » Rock crushers » Mud pumps » Piston pumps » Hammer mills » Tub grinders » Fans HP610S The HP610S eliminates the need for manual adjustment and high speed engagement, while eliminating jammed engagements. » 783 kW (1,050 hp) @ 2,100 rpm. » SAE 1 and SAE 0. » SAE 14 and SAE 18. » Via torsional coupling. » Wet hydraulic clutch. » In line or side load. » Electronic control. » Optional pump drive tower. » 4 pads. » To SAE D. » 358 kW (480 hp) total / 224 kW (300 hp) each. » 1:1 Ratio. Designed for: Heavy duty side load applications. HP300I With features similar to the HP610S, the HP300I also eliminates the need for manual adjustment and high speed engagement, while eliminating jammed engagements. » 783 kW (1,050 hp) @ 2,100 RPM. » SAE 1 and SAE 0. » SAE 14 and SAE 18. » Via Torsional Coupling. » Wet Hydraulic Clutch. » In Line Applications. » Electronic Control. » Optional Pump Drive Tower. » 4 Pads. » To SAE D. » 358 kW (480 hp) total / 224 kW (300 hp) each. » 1:1 Ratio. Designed for: Heavy duty in line applications. www.jbj.co.uk/mechanica an excellence
RkJQdWJsaXNoZXIy NzQyNjQ=