® DENTEX FL couplings are torsionally stiff crowned tooth flange couplings made from a combination of steel and plastic for diesel engine drives. The driving flange is made from glass-fibre reinforced polyamide for high mechanical rigidity and heat resistance. The coupling hub with external crowned teeth is made from steel. ® The Dentex FL coupling allows a keyed connection between diesel engine and hydraulic pump, the pump centred over the SAE housing. ® The application of the Dentex FL coupling results in a non-critical service due to the coupling stiffness. The hazard of a rotating oscillation during the drive will be avoided. If it is not possible to secure the hub by means of end-disc and screw in the case of pump shafts with profiled gear teeth (according to DIN 5480, 5482, SAE), the use of a clamping hub connection should be considered. The radial distortion guarantees a fit on the pump shaft which is free from clearance. Pump Drive Components ® Standard Dentex FL Coupling Typical Layout For A Hydrostatic Pump Direct Coupled To An Engine Flywheel Flywheel Housing Pump Mounting Plate Flywheel Nylon Flange Pump Steel Hub 31 #DriveLineHarmony www.jbj.co.uk/couplings.html
RkJQdWJsaXNoZXIy NzQyNjQ=