Pump Drive Components Standard Dentex® Coupling B Assembly Instructions On assembly it is important that the hubs are correctly fitted on the shafts and that the dimension E is maintained. The dimension E can be controlled by the total assembley length L. An incorrect dimension E has a negative influence on the performance of the coupling. Check the coupling sleeve has minimal axial movement before machine operation. The permissible displacement values depend on rotation and transmitted power. H* is the minimum dimension required for the disengaging of the coupling. Finish bores according to ISO-standard H7, keyway according to DIN 6885, sheet 1 (JS9). Weight and moment of inertia values refer to maximum diameter d without keyway. Steel Nylon 28 #DriveLineHarmony www.jbj.co.uk/couplings.html
RkJQdWJsaXNoZXIy NzQyNjQ=