Cataloque LM1 - 004E Page 28 Edition 2010-08/03 Pneumatic gearwheel motors with planetal gear general informations These motors have a pneumatic-gear-wheel-motor of the size PMW 160, PMW 250, PMW 400 or PMW 530 with flanged planetal gear of 1, 2 or 3 stages. A holding brake can be flanged between motor and gear. Please demand for other gear ratios or gear types (foot-gear, angular-gear, worm gear etc.). The rpm should not be higher than in the tables as max. rpm indicated. The rpm will be regulated or limited by the charge or a throttle valve. Depending to the mounting position it must be guaranteed, that the gear parts inside are provided with oil. For a vertical mounting there should therefor be an oilcompensating bin. Mounting position horizontal (B3) ventilation filter oil level plug air supply G1x14 deep drain plug Mounting position vertical (V6) 200 Ø 105 80 compensating bin for gear oil AN: 80.9031.0001 Mounting position vertical (V5) ventilation cap oil level eye Please use gear oils with EP- addition, a minimum viscosity of 95 and a viscosity-class according ISOstandardization 3448, temperature-independant. For usual applications use for operating temperatures between +40°C and +65°C - viscosity VG 320 according ISO 3448. For other temperatures please see operating instructions. Commissioning: Fill in oil; see operating and servicing manual.
RkJQdWJsaXNoZXIy NzQyNjQ=