2013-08 / 04 Catalogue LM1 - 008 UK Page 14 Edition Technical data pneumatic motor with spur gear DMO Specifications : - The data is calculated on the basis of 6 bar overpressure and the nominal speed. Speeds : - The max. idle speed is controlled by means of the speed controller. - With nominal speed, the nominal torque is delivered. With higher torques, the nominal speed will drop until standstill. Nominal speed, torque, power, air consumption: - The data is calculated proportionally to the operating pressure of 6 bar. - For other operating pressures, the data is converted proportionally. Air consumption : Specification in standard cubic meters/minute [Nm³/min] pursuant to DIN 1343, ISO 2533 gear unit : A degree of efficiency of μ= 0,91 was assumed for the spur gear unit. model gear ratio i geometr. displacem. Vg (cm3/U) operat. pressure speed range data at nom. speed and 6 bar exc. pressure nom. pressure n [min-1] idle speed n [min-1] torque power P (kW) air consumpt. Q (Nm3/min) cont. p (bar) max. p (bar) start T (min/max Nm) nom. T (Nm) DMO 8/10 1,92 1695 6 8 520 ap. 625 108-124 105 5,7 9 DMO 8/10 2,80 2470 6 8 355 ap. 430 158-181 153 5,7 9 DMO 8/12 1,92 1695 6 8 625 ap. 730 108-124 103 6,8 10 DMO 8/12 2,80 2470 6 8 430 ap. 500 158-181 150 6,8 10 DMO 8/15 1,92 1695 6 8 780 ap. 875 108-124 100 8,2 12 DMO 8/15 2,80 2470 6 8 535 ap. 600 158-181 145 8,2 12 DMO 8/18 1,92 1695 6 8 940 ap.1015 108-124 96 9,4 14 DMO 8/18 2,80 2470 6 8 640 ap. 700 158-181 140 9,4 14 DMO 8/20 1,92 1695 6 8 1040 ap. 1120 108-124 94 10,3 15 DMO 8/20 2,80 2470 6 8 715 ap. 770 158-181 138 10,3 15 DMO 15/10 2,00 2860 6 8 500 ap. 600 209-239 202 10,6 14 DMO 15/10 2,75 3935 6 8 360 ap. 435 288-328 278 10,6 14 DMO 15/12 2,0 2860 6 8 600 ap. 700 209-239 199 12,5 16 DMO 15/12 2,75 3935 6 8 435 ap. 510 288-328 273 12,5 16 DMO 15/15 2,0 2860 6 8 750 ap. 840 209-239 189 14,9 19 DMO 15/15 2,75 3935 6 8 545 ap. 610 288-328 260 14,9 19 DMO 15/18 2,0 2860 6 8 900 ap. 975 209-239 186 17,5 23 DMO 15/18 2,75 3935 6 8 655 ap. 710 288-328 155 17,5 23 DMO 15/20 2,0 2860 6 8 1000 ap. 1075 209-239 180 18,9 24 DMO 15/20 2,75 3935 6 8 730 ap. 780 288-328 248 18,9 24 DMO 20/10 2,0 4790 6 8 500 ap. 600 310-357 309 16,2 22 DMO 20/10 2,75 6585 6 8 360 ap. 435 426-491 425 16,2 22 DMO 20/12 2,0 4790 6 8 600 ap. 700 310-357 302 19,0 25 DMO 20/12 2,75 6585 6 8 435 ap. 510 426-491 416 19,0 25 DMO 20/15 2,0 4790 6 8 750 ap. 840 310-357 284 22,3 28 DMO 20/15 2,75 6585 6 8 545 ap. 610 426-491 390 22,3 28 DMO 20/18 2,0 4790 6 8 900 ap. 975 310-357 262 24,7 31 DMO 20/18 2,75 6585 6 8 655 ap. 710 426-491 360 24,7 31 DMO 20/20 2,0 4790 6 8 1000 ap. 1075 310-357 244 25,5 32 DMO 20/20 2,75 6585 6 8 730 ap. 780 426-491 355 25,5 32
RkJQdWJsaXNoZXIy NzQyNjQ=