Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating (2) Nom. ratio (Act. rating) (B) (A) 34 80 (B) (A) 38 85 (A) (A) 45 95 (A) (A) 50 105 (B) (A) 53 130 (B) (A) 60 150 (A) (B) 67 170 (A) 71 (2) Nom. ratio (Act. rating) (A) (A) 38 95 (A) (A) 45 105 (A) (A) 50 125 (A) (A) 60 150 (A) 67 (A) 71 (A) 80 85 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 45 105 (A) (A) 50 130 (B) (A) 53 150 (A) (B) 67 170 (A) 71 (A) 80 (A) 85 (A) 95 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (B) (B) 10 25 (A) 13 (B) 16 (A) 21 (2) Nom. ratio (Act. rating) (A) 12 (A) 14 (A) 18 (A) 21 (2) Nom. ratio (Act. rating) 12 28 (A) (C) 16 34 (A) (D) 18 (A) 25 (B) (2) Nom. ratio (Act. rating) (A) 13 (B) 16 (A) 21 (B) 25 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 160 530 (A) (A) 190 560 (A) (A) 220 630 (A) (A) 250 670 (A) (A) 300 750 (A) (A) 340 800 (A) (A) 360 850 400 900 (A) (A) (A) (A) 420 1000 (A) 450 (A) 480 (A) 500 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 170 750 (A) (A) 190 800 (A) (A) 220 900 (A) (B) 260 950 (A) (B) 300 1050 (A) (B) 340 1200 (A) 400 420 (A) (A) 480 (A) 530 (A) 560 (A) 630 (2) Nom. ratio (Act. rating) 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 16/33 kW 16/30 kW 15/27 kW 15/26 kW 15/25 kW (3) P th. /max. 6700 Nm 6000 Nm 5000 Nm 4200 Nm 3600 Nm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 12/28 kW 12/25 kW 11/17 kW 11/16 kW 11/15 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 7.5/9 kW 7.5/8 kW 6/6 kW 5.5/5.5 kW 5/5 kW (3) P th. /max. (A) 8250 (B) 7200 (A) 7000 (B) 6200 (C) 5500 (D) 5100 (A) 5700 (A) 4900 (B) 4300 (A) 4100 (B) 3600 (C) 3150 9000 Nm 8000 Nm 6700 Nm 5500 Nm 4500 Nm PSR 67 PSR 60 PSR 50 PSR 42 PSR 36 Model R2 R3 R4 Planetary Gearboxes Series PSR 36 - 67 120 100 80 60 40 20 -120 -80 -40 0 40 80 120 160 Distance from shaft shoulder (mm) Admissible radial load (kN) Bearing capacity, solid shafts 6) and 8) 200 180 160 140 120 100 80 60 40 20 180 160 140 (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torquemay vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios seeAnnex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and appl i cat ion/duty see sect ion B4, spec i ficat ions, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) 9 www.jbj.co.uk/planetary-gearboxes.html (B) (C) 10 21 (A) (B) 12 25 (B) (B) 16 30 (A) (C) 18 34 (B) (A) 34 90 (A) (B) 38 100 (A) (A) 45 110 (B) (A) 53 125 (A) (B) 60 150 (A) (B) 67 170 (A) (B) 71 210 80 240 (A) (A) (A) (A) 38 110 (A) (A) 42 125 (B) (B) 53 150 (A) (B) 60 170 (A) (A) 67 200 (A) (A) 71 240 (A) 80 90 (A) (A) (A) 140 630 (A) (A) 160 670 (B) (A) 180 750 (A) (A) 200 850 (A) (B) 220 900 (A) (B) 260 1050 (A) (B) 300 1250 340 1400 (A) (B) (A) (C) 400 1600 (A) 450 (A) 500 (A) 560 (A) (A) 170 630 (A) (A) 190 750 (A) (A) 220 800 (A) (A) 250 900 (A) (A) 260 1000 (A) (B) 300 1200 (A) 340 360 (A) (A) 400 (A) 480 (A) 530 (A) 560 (A) (A) 140 670 (A) (A) 160 750 (A) (A) 200 850 (A) (B) 220 950 (A) (B) 250 1050 (A) (B) 300 1200 (A) (C) 340 1400 400 1600 (A) (D) (A) 450 (A) 500 (A) 560 (A) 630 #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=