120 100 80 60 40 20 -120 -80 -40 0 40 80 120 160 Distance from shaft shoulder (mm) Admissible radial load (kN) Bearing capacity, solid shafts 6) and 8) 200 180 160 140 120 100 80 60 40 20 180 160 140 (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torquemay vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios seeAnnex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and appl i cat ion/duty see sect ion B4, spec i ficat ions, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating 42 120 300 (A) (A) (B) 48 130 340 (A) (A) (C) 53 160 (A) (A) 63 180 (A) (A) 71 210 (A) (B) 85 240 (A) (B) 100 260 (A) (B) (2) Nom. ratio (Act. rating) (A) (A) 48 130 (A) (A) 53 150 (A) (A) 60 160 (A) (A) 71 180 (A) (A) 85 210 (A) (B) 100 240 (A) 110 (2) Nom. ratio (Act. rating) (A) (A) 42 110 (A) (A) 48 120 (A) (A) 53 130 (A) (A) 60 150 (A) (A) 71 160 (A) (A) 85 180 (A) 100 (2) Nom. ratio (Act. rating) 48 130 300 (A) (A) (C) 53 150 340 (A) (A) (D) 63 160 (A) (A) 71 180 (A) (A) 80 210 (A) (B) 95 240 (A) (B) 110 280 (A) (C) (2) Nom. ratio (Act. rating) (A) (A) 53 150 (A) (A) 60 170 (B) (A) 71 180 (A) (A) 80 210 (A) (B) 95 240 (A) 110 (A) 130 (2) Nom. ratio (Act. rating) 11 22 42 (B) (A) (B) 12 26 48 (A) (A) (C) 14 30 (A) (B) 16 35 (B) (B) 19 38 (A) (B) (2) Nom. ratio (Act. rating) (B) (A) 11 22 (B) (A) 12 26 (A) (A) 14 30 (A) (B) 16 35 (B) 19 (2) Nom. ratio (Act. rating) (A) (A) 12 26 (A) 14 (A) 16 (A) 19 (A) 22 (2) Nom. ratio (Act. rating) 14 34 (A) (A) 19 36 (A) (A) 22 40 (A) (A) 26 48 (A) (A) 30 (A) (2) Nom. ratio (Act. rating) (A) (B) 16 36 (B) 19 (A) 22 (A) 25 (A) 30 (2) Nom. ratio (Act. rating) 3.3 5.0 6.9 (B) (B) (C) 3.8 6.1 (A) (B) (2) Ratio (Act. rating) 3.3 4.3 5.1 (B) (A) (B) (2) Ratio (Act. rating) (A) (A) 3.7 4.4 (2) Ratio (Act. rating) (A) (C) 3.7 5.8 (B) (D) 5.0 6.9 (2) Ratio (Act. rating) (A) (B) 4.3 5.1 (2) Ratio (Act. rating) (A) (A) (A) 200 500 1250 (A) (A) (B) 248 600 1500 (A) (A) (B) 260 670 1700 (A) (A) (B) 280 710 1800 (A) (A) (B) 320 800 2000 (A) (A) (C) 360 900 2300 (A) (A) 400 1000 (A) (A) 450 1100 (2) Nom. ratio (Act. rating) (A) (A) 220 750 (A) (A) 280 950 (A) (A) 320 1050 (A) (A) 380 1100 (A) (A) 420 1250 (A) (A) 500 1400 (A) (B) 560 1500 (A) (B) 670 1700 (2) Nom. ratio (Act. rating) (A) (A) 200 600 (A) (A) 240 670 (A) (A) 280 750 (A) (A) 360 800 (A) (A) 420 900 (A) (A) 480 1100 (A) (A) 500 1300 (A) 560 (2) Nom. ratio (Act. rating) (A) (A) (B) 200 560 1400 (A) (A) (B) 240 600 1500 (A) (A) (B) 260 670 1700 (A) (A) (C) 300 750 1900 (A) (A) (D) 360 800 2000 (A) (A) (D) 420 900 2300 (A) (A) 480 1050 (A) (A) 530 1250 (2) Nom. ratio (Act. rating) (A) (A) 220 630 (A) (A) 280 670 (A) (A) 300 750 (A) (A) 360 900 (A) (A) 380 1050 (A) (A) 420 1200 (A) (A) 480 1400 (A) (B) 560 1700 (2) Nom. ratio (Act. rating) 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm n nom./max. 1 15/100 kW 15/90 kW 13/67 kW 13/63 kW 13/60 kW (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 8/33 kW 8/30 kW 7.5/27 kW 7.5/26 kW 7.5/25 kW (3) P th. /max. 6700 Nm 6000 Nm 5000 Nm 4200 Nm 3600 Nm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 6/28 kW 6/25 kW 5.5/17 kW 5.5/16 kW 5.5/15 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 5/9 kW 5/8 kW 4.5/6 kW 4.5/6 kW 4.5/5 kW (3) P th. /max. (A) 8250 (B) 7200 (A) 7000 (B) 6200 (C) 5500 (D) 5100 (A) 5700 (A) 4900 (B) 4300 (A) 4100 (B) 3600 (C) 3150 9000 Nm 8000 Nm 6700 Nm 5500 Nm 4500 Nm PSR 67 PSR 60 PSR 50 PSR 42 PSR 36 Model L1 L2 L3 L4 Planetary Gearboxes Series PSR 36 - 67 7 www.jbj.co.uk/planetary-gearboxes.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=