120 100 80 60 40 20 120 100 80 60 40 20 -120 -80 -40 0 40 80 120 160 (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torquemay vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios seeAnnex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and appl i cat ion/duty see sect ion B4, spec i ficat ions, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) Distance from shaft shoulder (mm) Admissible radial load (kN) Bearing capacity, solid shafts 6) and 8) 42 120 300 (A) (A) (B) 48 130 340 (A) (A) (C) 53 160 (A) (A) 63 180 (A) (A) 71 210 (A) (B) 85 240 (A) (B) 100 260 (A) (B) (2) Nom. ratio (Act. rating) (A) (A) 48 130 (A) (A) 53 150 (A) (A) 60 160 (A) (A) 71 180 (A) (B) 85 210 (A) (B) 100 240 (A) 110 (2) Nom. ratio (Act. rating) (A) (A) 42 110 (A) (A) 48 130 (A) (A) 53 150 (A) (A) 60 160 (A) (A) 71 180 (A) (A) 85 210 (A) 100 (2) Nom. ratio (Act. rating) 42 120 300 (A) (A) (D) 48 140 340 (A) (A) (D) 53 160 (A) (A) 63 180 (A) (A) 71 210 (A) (B) 85 240 (A) (B) 100 280 (A) (C) (2) Nom. ratio (Act. rating) (A) (A) 48 130 (A) (A) 53 150 (A) (A) 60 160 (A) (A) 75 180 (A) (A) 85 210 (A) (B) 100 240 (A) 110 (2) Nom. ratio (Act. rating) 11 22 42 (B) (A) (B) 12 26 48 (A) (A) (C) 14 30 (A) (B) 16 35 (B) (B) 19 38 (A) (B) (2) Nom. ratio (Act. rating) (B) (A) 11 22 (B) (A) 12 26 (A) (A) 14 30 (A) (B) 16 35 (B) 19 (2) Nom. ratio (Act. rating) (A) (A) 12 26 (A) (A) 14 30 (A) 16 (A) 19 (A) 22 (2) Nom. ratio (Act. rating) 12 26 48 (A) (A) (D) 14 30 (A) (A) 16 35 (A) (A) 19 40 (A) (A) 22 42 (A) (B) (2) Nom. ratio (Act. rating) (A) (A) 14 30 (A) (B) 16 35 (B) 19 (A) 22 (A) 26 (2) Nom. ratio (Act. rating) 3.3 5.0 6.9 (B) (B) (C) 3.8 6.1 (A) (B) (2) Ratio (Act. rating) 3.3 4.3 5.1 (B) (A) (B) (2) Ratio (Act. rating) (A) (A) 3.7 4.4 (2) Ratio (Act. rating) (A) (C) 3.7 5.8 (B) (D) 5.0 6.9 (2) Ratio (Act. rating) (A) (B) 4.3 5.1 (2) Ratio (Act. rating) (A) (A) (A) 200 500 1250 (A) (A) (B) 248 600 1500 (A) (A) (B) 260 670 1700 (A) (A) (B) 280 710 1800 (A) (A) (B) 320 800 2000 (A) (A) (C) 360 900 2300 (A) (A) 400 1000 (A) (A) 450 1100 (2) Nom. ratio (Act. rating) (A) (A) 220 750 (A) (A) 280 950 (A) (A) 320 1050 (A) (A) 380 1100 (A) (A) 420 1250 (A) (A) 500 1400 (A) (B) 560 1500 (A) (B) 670 1700 (2) Nom. ratio (Act. rating) (A) (A) 240 750 (A) (A) 280 900 (A) (A) 320 1050 (A) (A) 360 1100 (A) (A) 420 1250 (A) (A) 500 1400 (A) 560 (A) 670 (2) Nom. ratio (Act. rating) (A) (A) (A) 200 500 1250 (A) (A) (B) 240 600 1500 (A) (A) (B) 260 670 1700 (A) (A) (C) 280 710 1900 (A) (A) (D) 320 800 2000 (A) (A) (D) 360 900 2300 (A) (A) 400 1000 (A) (A) 450 1100 (2) Nom. ratio (Act. rating) (A) (A) 240 750 (A) (A) 280 800 (A) (B) 320 900 (A) (A) 380 1050 (A) (A) 420 1250 (A) (A) 500 1400 (A) (B) 560 1700 (B) 670 (2) Nom. ratio (Act. rating) 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 9/33 kW 9/30 kW 8.5/28 kW 8.5/26.5 kW 8.5/25 kW (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 5.5/19 kW 5.5/17 kW 5/16 kW 5/15.5 kW 5/15 kW (3) P th. /max. 3200 Nm 2800 Nm 2200 Nm 1800 Nm 1500 Nm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 4.5/11 kW 4.5/10 kW 4/8 kW 4/7.5 kW 4/7 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 3.7/3.5 kW 3.7/3 kW 3.5/2.5 kW 3.5/2.3 kW 3.5/2 kW (3) P th. /max. (A) 3700 (B) 3350 (A) 3200 (B) 2800 (C) 2600 (D) 2400 (A) 2400 (A) 2050 (B) 1800 (A) 1700 (B) 1500 (C) 1300 Actual Torque (4) Rating (Nm) 4100 Nm 3700 Nm 2800 Nm 2400 Nm 2000 Nm (5) Peak Torque (1) Torque Rating PSR 32 PSR 28 PSR 22 PSR18 PSR 15 Model L1 L2 L3 L4 Planetary Gearboxes Series PSR 15 - 32 5 www.jbj.co.uk/planetary-gearboxes.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=