25 #DriveLineHarmony (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torquemay vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios seeAnnex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and appl i cat ion/duty see sect ion B4, spec i ficat ions, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) www.jbj.co.uk/planetary-gearboxes.html Planetary Gearboxes Series PSR 630 - 1300 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating (2) Nom. ratio (Act. rating) (A) (A) 40 100 (A) (B) 45 110 (A) (A) 53 120 (A) (A) 60 140 (A) (B) 63 160 (A) (B) 75 180 (A) 80 90 (A) (2) Nom. ratio (Act. rating) (B) (A) 40 100 (A) (B) 45 110 (B) (A) 53 120 (B) (A) 60 140 (A) (B) 63 150 (A) (B) 75 180 (B) 80 90 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (B) (A) 53 140 (B) (B) 60 150 (A) (B) 63 180 (A) 75 (B) 80 (A) 90 (B) 95 120 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 150 710 (A) (A) 180 800 (A) (A) 200 900 (A) (A) 240 1000 (A) 280 320 (A) (A) 360 (A) 400 (A) 450 (A) 500 530 (A) 600 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 180 710 (B) (B) 200 750 (A) (A) 240 850 (A) (A) 280 950 320 1100 (A) (B) (A) (B) 360 1200 (A) 400 (A) 450 (A) 500 530 (A) 600 (A) 630 (A) (2) Nom. ratio (Act. rating) n nom./max. 1 (3) P th. /max. 130000 Nm 110000 Nm 90000 Nm 75000 Nm 63000 Nm 2250/3000 rpm 2250/3000 rpm 2250/3000 rpm 2250/3000 rpm 2250/3000 rpm 50/220 kW 45/200 kW 41/160 kW 37/150 kW 28/110 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 33/100 kW 30/90 kW 26.5/70 kW 24/63 kW 17/37 kW (3) P th. /max. (A) 160000 (B) 135000 (A) 133000 (B) 112000 (A) 110000 (B) 92000 (A) 89000 (B) 75000 (A) 73000 215000 Nm 190000 Nm 160000 Nm 140000 Nm 100000 Nm PSR 1300 PSR 1100 PSR 900 PSR 750 PSR 630 Model R2 R3 R4 (A) 53 (A) 71 (A) 80 (A) 95 (A) 110 (A) 130 (A) 150 (B) (A) 40 100 (A) (B) 45 110 (B) (A) 53 120 (B) (A) 60 140 (A) (B) 63 150 (A) (B) 75 180 (B) 80 90 (A) (A) (A) 170 1050 (B) 200 (A) 240 (A) 280 (A) 320 (A) 360 420 (A) (A) 480 (A) 560 (A) 630 (A) 750 (A) 900 (A) (A) 150 630 (A) (A) 180 710 (A) (B) 200 750 (A) (A) 240 850 (A) (A) 280 950 (A) (B) 320 1100 360 1200 (A) (B) (A) 400 (A) 450 (A) 500 (A) 560 (A) 630 (A) (A) 180 710 (B) (B) 200 750 (A) (A) 240 850 (A) (A) 280 950 320 1100 (A) (B) (A) (B) 360 1200 (A) 400 (A) 450 (A) 500 530 (A) 600 (A) 630 (A) Bearing capacity, solid shafts 6) and 8) Admissible radial load (kN) 700 600 500 400 300 200 800 700 600 500 400 300 200 800 Distance from shaft shoulder (mm) 0 -100 -200 100 200 300
RkJQdWJsaXNoZXIy NzQyNjQ=