Admissible radial load (kN) 19 #DriveLineHarmony 700 (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torquemay vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios seeAnnex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and appl i cat ion/duty see sect ion B4, spec i ficat ions, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) www.jbj.co.uk/planetary-gearboxes.html 600 500 400 300 200 100 Distance from shaft shoulder (mm) 300 200 100 0 -100 -120 700 600 500 400 300 200 100 Planetary Gearboxes Series PSR 300 - 560 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating 48 130 260 (A) (A) (B) 53 150 300 (A) (A) (B) 63 160 340 (A) (A) (C) 71 180 (A) (A) 80 200 (A) (B) 95 220 (A) (B) 110 240 (A) (B) (2) Nom. ratio (Act. rating) (A) (A) 53 150 (B) (A) 63 160 (A) (A) 71 180 (A) (B) 80 210 (A) 95 (A) 110 (A) 130 (2) Nom. ratio (Act. rating) (A) (A) 53 130 (A) (A) 60 150 (A) (A) 71 160 (A) (A) 80 180 (A) (A) 85 210 (A) 95 (A) 110 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 53 150 (A) (A) 60 170 (B) (A) 71 180 (A) (A) 80 210 (A) (B) 95 240 (A) 110 (A) 130 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 14 * 30 (A) (B) 16 35 (B) 19 (A) 22 (A) 26 (2) Nom. ratio (Act. rating) (A) (A) 12 * 26 (A) (A) 14 30 (A) 16 (A) 19 (A) 22 (2) Nom. ratio (Act. rating) 12 * 30 (A) (A) 16 36 (A) (A) 19 42 (A) (A) 22 (A) 26 (A) (2) Nom. ratio (Act. rating) (A) (B) 16 35 (B) 19 (A) 22 (A) 25 (A) 30 (2) Nom. ratio (Act. rating) 3.7 6.1 (A) (B) 5.0 6.9 B) (C) (2) Ratio (Act. rating) 4.3 5.1 (A) (B) (2) Ratio (Act. rating) (A) (A) 3.7 4.4 (2) Ratio (Act. rating) (A) (C) 3.7 5.8 (B) (D) 5.0 6.9 (2) Ratio (Act. rating) (A) (B) 4.3 5.1 (2) Ratio (Act. rating) (A) (A) (A) 200 560 1100 (A) (A) (A) 240 600 1250 (A) (A) (B) 260 670 1400 (A) (A) (B) 300 710 1500 (A) (A) (B) 320 750 1700 (A) (A) (B) 360 900 1800 (A) (A) (B) 420 900 2000 (A) (A) (C) 480 1050 2300 (2) Nom. ratio (Act. rating) (A) (A) (B) 200 560 1500 (A) (A) 240 670 (A) (A) 260 750 (A) (B) 300 800 (A) (A) 360 900 (A) (A) 380 1050 (A) (B) 420 1200 (A) (A) 480 1300 (2) Nom. ratio (Act. rating) (A) (A) 220 600 (A) (A) 260 670 (A) (A) 300 750 (A) (A) 320 800 (A) (A) 360 900 (A) (A) 420 1050 (A) (A) 480 1250 (A) (A) 560 1400 (2) Nom. ratio (Act. rating) (A) (A) (A) 200 500 900 (A) (A) (A) 220 530 1000 (A) (A) (A) 260 560 1100 (A) (A) (B) 300 600 1200 (A) (A) (B) 320 670 1300 (A) (A) (B) 360 710 1500 (A) (A) (C) 420 750 1700 (A) (A) (D) 480 800 2000 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 1800/2500 rpm 1800/2500 rpm 1800/2500 rpm 1800/2500 rpm 1500/2000 rpm n nom./max. 1 45/360 kW 37/240 kW 40/300 kW 40/290 kW 40/280 kW (3) P th. /max. 2000/3000 rpm 2000/3000 rpm 2000/3000 rpm 2000/3000 rpm 1800/2500 rpm n nom./max. 1 30/220 kW 30/200 kW 25/170 kW 25/160 kW 25/150 kW (3) P th. /max. 56000 Nm 48000 Nm 42000 Nm 36000 Nm 30000 Nm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 18.5/100 kW 18.5/90 kW 16/80 kW 16/75 kW 16/70 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 2800/3800 rpm n nom./max. 1 14/33 kW 14/31 kW 12/30 kW 12/29 kW 12/28 kW (3) P th. /max. (A) 65000 (B) 58000 (A) 56000 (B) 51000 (C) 47000 (D) 42500 (A) 51000 (A) 44000 (B) 39000 (A) 37000 (B) 33000 (C) 28000 75000 Nm 65000 Nm 58000 Nm 52000 Nm 45000 Nm PSR 560 PSR 480 PSR 420 PSR 360 PSR 300 Model L1 L2 L3 L4 (A) (A) (A) 220 670 1400 (B) (A) (B) 260 750 1500 (A) (A) (B) 300 850 1700 (A) (A) 360 900 (A) (A) 420 950 (A) (A) 480 1050 (A) (A) 560 1200 (A) (A) 600 1300 (A) (B) 14 36 (A) (B) 19 42 (A) (C) 22 48 (A) 26 (B) 30 *(on request) *(on request) *(on request) (A) (A) 60 160 (A) (B) 71 180 (A) (B) 80 210 (A) (C) 85 250 (A) (D) 95 300 (A) 110 (A) 130 Bearing capacity, solid shafts 6) and 8)
RkJQdWJsaXNoZXIy NzQyNjQ=