www.jbj.co.uk/couplings.html#flender TYPE BWT (Variant AB) Torsionally Flexible Jaw Couplings 24 28 38 42 48 55 65 75 90 45 95 190 265 330 460 670 1400 2500 65 160 325 450 550 700 1000 2000 3700 14500 12500 10000 8500 7500 6500 6000 5000 4000 57 67 82 97 107 123 138 163 205 25 28 36 43 48 57 64 76 95 18 20 24 26 28 30 35 40 45 37 41 45 48 50 60 65 75 85 1.5 1 1.5 1.5 2 2 2.5 2.5 3 2LC0160-1AD 2LC0160-2AD 2LC0160-3AD 2LC0160-4AD 2LC0160-5AD 2LC0160-6AD 2LC0160-7AD 2LC0160-8AD 2LC0161-0AD 1008 1108 1108 1610 1615 2012 2012 2517 2) 2517 3020 2) 3020 3535 2) 10 10 10 14 14 14 14 55 16 65 25 80 25 28 28 42 42 50 50 60 60 75 75 90 54 58 58 86 80 100 100 118 118 142 142 170 23 23 23 26 39 33 33 46 46 52 52 90 64 66 70 78 106 96 101 127 132 144 149 225 0.00015 0.00025 0.0005 0.0013 0.002 0.004 0.006 0.008 0.015 0.017 0.037 0.06 0.6 0.8 1.2 1.8 2.6 3.5 4.5 5.5 7.7 8 12.9 19.8 Mass moment of inertia J /J 1 2 2 (kgm ) Weight m (kg) Dimensions (mm) ↗Article no. 1)* Type AB Speed nKmax (rpm) D1/D2 Keyway DIN 6885 DA ND1/ ND2 NL1/ NL2 D3 S S2 ΔS2 LG 92 Shore A (Nm) 95 Shore A (Nm) min. max. ± Rated Torque TKN Size Taper Clamping Bush Size 9 #DriveLineHarmony Part 3 Coupling Element Part 4 Variant AB ØD1 ØDA ØND1 ØND2 ØD2 ØD3 J J 1 2 NL1 S S2 NL2 LG Notes » ØD1 Without taper clamping bush. » Weights apply to a whole coupling in the version with taper clamping bush. » T for the 95 ShoreA coupling element is limited to 2 x T for types KN Kmax BWT and BNT contrary to the table on page 4 of this catalogue. When using the 64 ShoreD coupling element, the same torque values apply as for the 95 ShoreA coupling element. With taper clamping bush. Configurable variants1) » ØD2 Without taper clamping bush. » Mass moments of inertia apply to a coupling half with taper clamping bush. » Coupling element hardness 92 ShoreA 95 ShoreA With taper clamping bush. » Coupling element hardness 92 Shore A. 2) Taper clamping bush version only possible in part 4. » N-BIPEX coupling BWN, size 42, variant A. 1) To identify complete item numbers specifying the available finish boring options and further order options, please contact jbj Techniques Ltd. technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk » Part 3: With Taper clamping bushes, size 1610, bore D1 38 H7 mm, with keyway to DIN 6885-1. Ordering Code: 2LC0160-4AD99-0AA0-Z L0V+M0T Ordering example » Part 4: With Taper clamping bushes, size 1610, bore D2 32 H7 mm, with keyway to DIN 6885-1.
RkJQdWJsaXNoZXIy NzQyNjQ=