www.jbj.co.uk/couplings.html#flender TYPE BWT (Variant B) Torsionally Flexible Jaw Couplings Variant B 24 28 38 42 48 55 65 75 90 45 95 190 265 330 460 670 1400 2500 65 160 325 450 550 700 1000 2000 3700 14500 12500 10000 8500 7500 6500 6000 5000 4000 57 67 82 97 107 123 138 163 205 25 28 36 43 48 57 64 76 95 18 20 24 26 28 30 35 40 45 37 41 45 48 50 60 65 75 85 1.5 1 1.5 1.5 2 2 2.5 2.5 3 2LC0160-1AC 2LC0160-2AC 2LC0160-3AC 2LC0160-4AC 2LC0160-5AC 2LC0160-6AC 2LC0160-7AC 2LC0160-8AC 2LC0161-0AC 1008 1108 1108 1610 1615 2012 2012 2517 2) 2517 3020 2) 3020 3535 2) 10 10 10 14 14 14 14 55 16 65 25 80 25 28 28 42 42 50 50 60 60 75 75 90 54 58 58 86 80 100 100 118 118 142 142 170 23 23 23 26 39 33 33 46 46 52 52 90 64 66 70 78 106 96 101 127 132 144 149 225 0.00015 0.00025 0.0005 0.0013 0.002 0.004 0.006 0.008 0.015 0.017 0.037 0.06 0.6 0.8 1.2 1.8 2.6 3.5 4.5 5.5 7.7 8 12.9 19.8 Mass moment of inertia J /J 1 2 2 (kgm ) Weight m (kg) Dimensions (mm) ↗Article no. 1)* Type B Speed nKmax (rpm) D1/D2 Keyway DIN 6885 DA ND1/ ND2 NL1/ NL2 D3 S S2 ΔS2 LG 92 Shore A (Nm) 95 Shore A (Nm) min. max. ± Rated Torque TKN Size Taper Clamping Bush Size Part 4 Coupling Element Part 4 G_MD10_EN_00242 J J 1 2 8 #DriveLineHarmony 1) To identify complete item numbers specifying the available finish boring options and further order options, please contact jbj Techniques Ltd. technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk 2) Taper clamping bush version only possible in part 4. Ordering example » Part 4: With Taper clamping bushes, size 1610, bore D2 32 H7 mm, with keyway to DIN 6885-1 » N-BIPEX coupling BWT, size 42, variant B. Ordering Code: 2LC0160-4AC99-0AA0-Z L0V+M0T » Part 3: With Taper clamping bushes, size 1610, bore D1 38 H7 mm, with keyway to DIN 6885-1 » Coupling element hardness 92 Shore A. With taper clamping bush. With taper clamping bush. Configurable variants1) » ØD2 Without taper clamping bush. » ØD1 Without taper clamping bush. » Coupling element hardness 92 ShoreA 95 ShoreA Notes » Mass moments of inertia apply to a coupling half without taper clamping bush. » Weights apply to a whole coupling in the version without taper clamping bush. » T for the 95 ShoreA coupling element is limited to 2 x T for types KN Kmax BWT and BNT contrary to the table on page 4 of this catalogue. When using the 64 ShoreD coupling element, the same torque values apply as for the 95 ShoreA coupling element. .
RkJQdWJsaXNoZXIy NzQyNjQ=