Standard SL Series Clutch SL111HP Series www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony SP111HP H K E F Dimensions are in mm (inches) 52 J G A B C D L Holes 552 (21³⁄ ) 511 (20¹⁄ ) 352 (13⁷⁄ ) 333 (13¹⁄ ) 72 (2.8346) 54 (2¹⁄ )* 100 (3¹⁵⁄ ) 219 (8⁵⁄ ) 140 (5¹⁄ ) 57 (2¹⁄ ) ⁵⁄ x ⁵⁄ keyway 12 12 (¹⁵⁄ ) 1 SL111HP X9895 A B C +0.000 -0.0005 D E +0.000 -0.0005 F G H J (length) K (diameter) +0.000 -0.001 Number Diameter mm (in) SAE Housing Number Model & Drawing Number Dimensions mm (in) Shaft (output stub) L 489 (19¹⁄ ) 448 (17⁵⁄ ) 2 451 (17³⁄ ) 410 (16¹⁄ ) 3 403 (15⁷⁄ ) 362 (14¹⁄ ) 4 12 12 (¹³⁄ ) 552 (21³⁄ ) 511 (20¹⁄ ) 352 (13⁷⁄ ) 333 (13¹⁄ ) 72 (2.8346) 40 (1⁹⁄ ) 100 (3¹⁵⁄ ) 235 (9¹⁄ ) 165 (6¹⁄ ) 57 (2¹⁄ ) ⁵⁄ x ⁵⁄ keyway 12 12 (¹⁵⁄ ) 1 SL111HP X9961 489 (19¹⁄ ) 448 (17⁵⁄ ) 2 451 (17³⁄ ) 410 (16¹⁄ ) 3 12 10 (¹³⁄ ) 552 (21³⁄ ) 511 (20¹⁄ ) 352 (13⁷⁄ ) 333 (13¹⁄ ) 72 (2.8346) 40 (1⁹⁄ ) 100 (3¹⁵⁄ ) 244 (9⁵⁄ ) 165 (6¹⁄ ) 64 (2¹⁄ ) ⁵⁄ x ⁵⁄ keyway 12 12 (¹⁵⁄ ) 1 SL111HP X9983A 489 (19¹⁄ ) 448 (17⁵⁄ ) 2 451 (17³⁄ ) 410 (16¹⁄ ) 3 12 10 (¹³⁄ ) 552 (21³⁄ ) 511 (20¹⁄ ) 352 (13⁷⁄ ) 333 (13¹⁄ ) 72 (2.8346) 40 (1⁹⁄ ) 100 (3¹⁵⁄ ) 244 (9⁵⁄ ) 165 (6¹⁄ ) 89 (3¹⁄ ) ⁷⁄ x ⁷⁄ keyway 12 12 (¹⁵⁄ ) 1 SL214P X9951 Dimensions of these Twin Disc SL PTOs with drive rings and over-centre clutch conform to the recommendations of SAE J 621d unless noted. Please note: * 2¹⁄ " dimension is non-SAE standard for 11.5" over-centre clutch.
RkJQdWJsaXNoZXIy NzQyNjQ=