The following general formula should be used for determining the actual applied load: L = Actual applied load kg (lbs) N = Shaft speed (rpm) D = Pitch diameter mm (inches) of pulley, etc. F = Load factor, 1.0 for chain or gear drive, 1.5 for timing belts, 2.5 for all V belts, 3.5 for flat belts. LF = 2.1 for reciprocating compressors and other severe shock drives and 1.8 for large inertia type drives (i.e. Crushers, chippers, planers, etc.) Compound Drives and Power Engaged Power Take-Off applications must have written factory review. IB318P0 RPM PTO Model 25.4 (1.0) 50.8 (2.0) 76.2 (3.0) 101.6 (4.0) 127.0 (5.0) X Distance, mm (in) – see diagram IP318P0 – Allowable Side Load, kg (lbs) Standard IB Series Clutch IB318P0 Series www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Dimensions are in mm (inches) 1000 152.4 (6.0) 177.8 (7.0) 203.2 (8.0) IB318P 228.6 (9.0) 1200 1800 2000 7396 (16306) 7004 (15442) 6203 (13625) 6011 (13253) 7411 (15683) 6737 (16852) 5966 (13153) 5782 (12747) 5999 (13225) 5746 (12669) 5569 (12278) 5123 (11295) (Imperial) L = x F x LF 126,000 x HP N x D (metric) L = x F x LF 1945010 x kW N x D 46 2200 5838 (12871) 5615 (12380) 5410 (11928) 4471 (9856) 3965 (8742) 3563 (7855) 3235 (7131) 2962 (6529) 1000 1200 1800 2000 7400 (16316) 7008 (15452) 6206 (13683) 6015 (13261) 6114 (13479) 5970 (13162) 5786 (12756) 5068 (11175) 4330 (9546) 2200 5842 (12880) 5620 (12389) 3777 (8328) 3350 (7387) 3010 (6637) 2732 (6025) 2502 (5517) IB318P0 1000 1200 1800 2000 5459 (12036) 4334 (9555) 3593 (7921) 3068 (6765) 2200 2678 (5903) 2375 (5236) 2136 (4704) 1937 (4271) 1774 (3910) IB318P0
RkJQdWJsaXNoZXIy NzQyNjQ=