Standard IB Series Inline Clutch IB318IL Series Specifications subject to change without prior notice in the interest of continual product improvement. Contact jbj Techniques Limited tel: +44 (0)1737 767493 or email: info@jbj.co.uk, your Twin Disc representative for engineering specifications. Patent pending. www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Features & Benefits: » Optional sintered iron plates. » Built in hex nut. » Ventilated center plates & driving ring. » Sealed for life pilot bearing. » Creates 25% higher torque capacity » Eases adjustment verification. » Improved heat dissipation. » Lower maintenance. Electric motor Up to 3 hours per day 3–10 hours per day Over 10 hours per day Multi-cylinder internal combustion engine Multi-cylinder internal combustion engine with high torque rise Single cylinder internal combustion engine 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.75 2.00 1.00 1.25 1.50 1.25 1.50 1.75 1.75 2.00 2.25 1.50 1.75 2.00 1.75 2.00 2.25 2.25 2.50 2.75 1.25 1.50 1.75 1.50 1.75 2.00 2.00 2.25 2.50 Prime Mover Duration of Service Uniform Moderate Load Heavy Load Up to 3 hours per day 3–10 hours per day Over 10 hours per day Up to 3 hours per day 3–10 hours per day Over 10 hours per day Up to 3 hours per day 3–10 hours per day Over 10 hours per day 5252 x HP Engine RPM = Torque (lb-ft) Torque x Load Factor = Application Torque (Use load factor from chart at left). To calculate application torque: 9550 x kW Engine RPM = Torque (Nm) Load Classifications based upon AGMA Load Characteristics All clutch engagements to be with prime mover below 1000 RPM. High inertia loads may require use of larger clutch. 43 Specifications – IB318IL1 Organic Sintered Model Number IB318IL1 Weight kg (lbs) SAE Housing Max. Input Torque Nm (lb-ft) 1 Maximum Safe Speed 8141 (6000) 10176 (7500) 418 (920) 2200
RkJQdWJsaXNoZXIy NzQyNjQ=