Standard IB Series Clutch IB314P Series www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Dimensions are in mm (inches) The following general formula should be used for determining the actual applied load: L = Actual applied load kg (lbs) N = Shaft speed (rpm) D = Pitch diameter mm (inches) of pulley, etc. F = Load factor, 1.0 for chain or gear drive, 1.5 for timing belts, 2.5 for all V belts, 3.5 for flat belts. LF = 2.1 for reciprocating compressors and other severe shock drives and 1.8 for large inertia type drives (i.e. Crushers, chippers, planers, etc.) Compound Drives and Power Engaged Power Take-Off applications must have written factory review. IB314P IB314P0 M2731 RPM PTO Model 25.4 (1.0) 50.8 (2.0) 76.2 (3.0) 101.6 (4.0) 127.0 (5.0) X Distance, mm (in) – see diagram IB314P0 & IB314P1 – Allowable Side Load, kg (lbs) 152.4 (6.0) 177.8 (7.0) (Imperial) L = x F x LF 126,000 x HP N x D (metric) L = x F x LF 1945010 x kW N x D 42 4068 (8969) 1000 3881 (8557) 3711 (8182) 3853 (8494) 1200 3676 (8104) 3514 (7748) 3412 (7522) 1800 3255 (7176) 3112 (6862) 3131 (6903) 2400 2987 (6586) 2856 (6586) 3120 (6878) 2758 (6080) 2471 (5448) IB314P1 M2529 1000 1200 1800 3153 (6911) 2400 3650 (8049) 3000 (6616) 2547 (5616) 2213 (4879) 1956 (4313) 1753 (3865) 4072 (8978) 3857 (8503) 3415 (7530) 2991 (6595) 3260 (7186) 2860 (6307) 3555 (7838) 3367 (7423) 2982 (6574) 2737 (6033) 2862 (6309) 2626 (5790) 2525 (5566) 2430 (5358)
RkJQdWJsaXNoZXIy NzQyNjQ=