Model TC Power Take-Off TC113 Series Specifications subject to change without prior notice in the interest of continual product improvement. Contact jbj Techniques Limited tel: +44 (0)1737 767493 or email: info@jbj.co.uk, your Twin Disc representative for engineering specifications. Patent pending. www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Features & Benefits: » External adjustment of lever engagement travel. » Spring loaded clutch » Sealed for life pilot bearing » Ease of adjusting lever travel » Adjustment not required » Less Maintenance Specifications – tc113 Model Number TC113P302 Maximum Safe Speed SAE Housing Dimension A mm (in) 3 Electric motor Up to 3 hours per day 3–10 hours per day Over 10 hours per day Multi-cylinder internal combustion engine Multi-cylinder internal combustion engine with high torque rise Single cylinder internal combustion engine 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.75 2.00 1.00 1.25 1.50 1.25 1.50 1.75 1.75 2.00 2.25 1.50 1.75 2.00 1.75 2.00 2.25 2.25 2.50 2.75 1.25 1.50 1.75 1.50 1.75 2.00 2.00 2.25 2.50 Prime Mover Duration of Service Uniform Moderate Load Heavy Load Up to 3 hours per day 3–10 hours per day Over 10 hours per day Up to 3 hours per day 3–10 hours per day Over 10 hours per day Up to 3 hours per day 3–10 hours per day Over 10 hours per day 5252 x HP Engine RPM = Torque (lb-ft) Torque x Load Factor = Application Torque (Use load factor from chart at left). To calculate application torque: 9550 x kW Engine RPM = Torque (Nm) Load Classifications based upon AGMA Load Characteristics All clutch engagements to be with prime mover below 1000 RPM. High inertia loads may require use of larger clutch. 97.6 (3.84) 3400 rpm 35 234.8 (9.12) 52 (2.047) 52 (2.047) 52 (2.047) Dimension B mm (in) Dimension C mm (in) Dimension D mm (in) Dimension E mm (in) TC113P303 3 97.6 (3.84) 3400 rpm 62 (2.441) 62 (2.441) 62 (2.441) 62 (2.441)
RkJQdWJsaXNoZXIy NzQyNjQ=