Standard SP Series Clutch SP314S Series www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Dimensions are in mm (inches) The following general formula should be used for determining the actual applied load: L = Actual applied load kg (lbs) N = Shaft speed (rpm) D = Pitch diameter mm (inches) of pulley, etc. F = Load factor, 1.0 for chain or gear drive, 1.5 for timing belts, 2.5 for all V belts, 3.5 for flat belts. LF = 2.1 for reciprocating compressors and other severe shock drives and 1.8 for large inertia type drives (i.e. Crushers, chippers, planers, etc.) Compound Drives and Power Engaged Power Take-Off applications must have written factory review. S Dimension mm (in) Standard & Stretch Side Load Capacity Values SP314S 2400 rpm Max. Load kgs (lbs) 2100 rpm Max. Load kgs (lbs) 1800 rpm Max. Load kgs (lbs) 1500 rpm Max. Load kgs (lbs) 127.0 (5.0) 152.4 (6.0) 177.8 (7.0) 203.2 (8.0) 228.6 (9.0) 254.0 (10.0) 4155 (9160) 4672 (10300) 5352 (11800) 5806 (12800) 5058 (11150) 4491 (9900) 4331 (9550) 4876 (10750) 5557 (12250) 6033 (13300) 5262 (11600) 4672 (10300) 4536 (10000) 5103 (11250) 5806(12800) 6305 (13900) 5511 (12150) 4876 (10750) 4808 (10600) 5398 (11900) 6169 (13600) 6668 (14700) 5806 (12800) 5148 (11350) (Imperial) L = x F x LF 126,000 x HP N x D (metric) L = x F x LF 1945010 x kW N x D 28
RkJQdWJsaXNoZXIy NzQyNjQ=