Low speed, high torque hydraulic motors available from jbj Techniques Limited

Design modifications in the flow control inside the motor as well as in the arrangement of the pistons have led to significant improvement of the constancy of the rotational speed. In addition, the speed range was clearly extended downwards. For the standard motor which is already precise in competitive -1 comparison, the ability to run is ensured for a minimum speed of 5 min . The high precision motor can achieve speeds of -1 significantly less than 1min with already good constancy of speed in unregulated operation. The -1 maximum speed is still up to 2000 min , depending on the motor size. AE series » KM series » available in a new High Precision version. Use as standard for stable speeds significantly less than 1rpm. Axial piston motors » Type AE3 - AE45 3 displacement 3 - 45 cm /rev operating pressure 210 bar speed up to 3000 rpm torque 34 - 134 Nm Radial piston motors » Type KM11 - KM110 3 displacement 11 - 110 cm /rev operating pressure 140/160 bar speed up to 3600 rpm torque 21 - 222 Nm notsiplaixA rotom tnemecalpsiD mc( 3 )U/ euqroT )mN( deepS )nim/1( erusserP )rab( rewoP )Wk( 3EA 68.2 6.8 0525 012 2.3 4EA 00.4 0.21 0573 012 2.3 5EA 41.5 5.51 0003 012 2.3 01EA 04.11 0.43 0003 012 7.7 61EA 00.61 0.84 0052 012 1.8 12EA 03.12 0.46 0042 012 3.01 22EA 05.22 0.76 0002 012 0.9 23EA 05.13 0.59 0002 012 5.21 04EA 05.04 0.221 0002 012 0.61 54EA 00.54 0.531 0002 012 0.81 » Also available with servo regulation to give the ultimate in low speed performance. » Precision drives ideally suited to test rig applications where accurate speed regulation is critical. » 01737 767493 info@jbj.co.uk www.jbj.co.uk » rotom tnemecalpsiD mc( 3 )U/ euqroT )mN( deepS )nim/1( erusserP )rab( rewoP )Wk( 11MK 11 12 0003 041 5.3 11MR 11 42 0063 061 7.4 22MK 22 05 0522 061 0.6 23MK 33 67 0051 061 0.6 54MK 44 001 0081 061 5.9 36MK 66 151 0021 061 5.9 09MK 88 871 009 041 5.8 011MK 011 222 057 041 5.8 Radial piston