www.jbj.co.uk/mechanical-power-conversion.html Hydraulic Power Take-Off Units HP610S Series 17 #DriveLineHarmony HP 610S Hydraulic Power Take-off Features & Benefits: » No pilot bearing. » Hydraulically actuated. » Straddle bearing design. » ease of installation. » remote actuation. » clutch adjustment not required. » Modular design. » Up to 784 kW (1050 hp). » Side load (shown). » Four live pump pads – 224 kW (300 hp) each, 358 kW (480 hp) total. » Torsional coupling input. » SAE 1, 0. » 457 mm (18˝) diameter sheave housing rotates 360° » Charge pump included Specifications subject to change without prior notice in the interest of continual product improvement. Contact jbj Techniques Limited tel: +44 (0)1737 767493 or email: info@jbj.co.uk, your Twin Disc representative for engineering specifications. Patent pending. Specifications – HP610S * Actual rating depends on application, prime mover and shock loads. Contact jbj Techniques technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk for load classification and assistance in the selection of the correct hydraulic PTO. Model Number Maximum Torque Rating* Nm (lb-ft) Maximum Safe Speed rpm Maximum Pulley Diameter mm (in) Maximum Pulley Length mm (in) [Grooves] Weight kg (lbs) HP610S – Long 4067 (3000) 2100 457 (18) 365 (14.38) [12] 630 (1390) HP610S – Short 4067 (3000) 2100 457 (18) 320 (12.62) [10] 585 (1289)
RkJQdWJsaXNoZXIy NzQyNjQ=