05 18 HQ Series VANE PUMPS
Versatility, power, compactness and low running costs Versatility, power, compactness and low running costs are the main characteristics of this range of vane pumps. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensive machine down time. The cartridge contains a rotor, vanes and inserts, a cam ring and two covers. During operation the rotor is driven by a splined shaft coupled to the drive unit. As the rotation speed increases, centrifugal forces, in combination with the pressure generated behind the vanes, push the vanes outwards, where they follow the profile of the cam of the ring with a sufficient contact pressure to ensure adequate hydraulic sealing. The two opposed pumping chambers formed by the elliptical profile of the cam cancel out radial loads on the shaft bearings, thereby giving them extremely long lifetimes. The versatility of this series of pumps enables them to meet the requirements of the most varied industrial applications. In fact, as well as their proven high reliability and excellent volumetric efficiency in all working conditions, they operate with particularly low noise levels. This is made possible by the special profile of the cam ring and the use of a 12 vane rotor that reduces the amplitude of the supply pressure pulses, thereby reducing induced vibrations. These vane pumps are extremely compact and are supplied with ISO norm mechanical couplings and SAE norm hydraulic fittings. This makes them very easy to install and guarantees their interchangeability with other similar pumps (eg. Vickers, Caterpillar, Denison). More detailed technical information is available from jbj Techniques Limited. jbj Techniques technical office, telephone: 01737 767493 email: info@jbj.co.uk www.jbj.co.uk/vanepumps.html
Page ....................................................................................................................................................................... 1 - 7 Single pump HQ02 series ....................................................................................................................................................................... 8 - 12 Single pump HQ03 series Double pump HQ21 series .................................................................................................................................................................... 13 - 22 Double pump HQ22 series .................................................................................................................................................................... 23 - 26 Double pump HQ31 series .................................................................................................................................................................... 27 - 35 Double pump HQ33 series .................................................................................................................................................................... 36 - 39 Cartridge information ................................................................................................................................................................................. 40 HQ seies operating instructions ...................................................................................................................................................... 41 .................................................................................................................................................................... 42 jbj Techniques product list Vane Pumps HQ Series H Y D R A U L I C S The details contained within this catalogue are reproduced in accordance with the latest information at publication of this catalogue. Errors & Omissions Excepted Last update: 24/05/2018
BD SERIES Fixed displacement high pressure hydraulic vane pumps. » three versions of single pump (from 10 to 227 l/min at 1000 rpm) » four versions of double pump (from 20 to 385 l/min at 1000 rpm) with input powers of over 328 kW at max pressure and speed. HD SERIES Fixed displacement high pressure hydraulic vane pumps. » single pump (from 11 to 99 l/min at 1000 rpm) » double pump (from 22 to 200 l/min at 1000 rpm) With maximum powers of over 126 kW at the max pressure and speed. BV SERIES Fixed displacement hydraulic vane pumps. » four versions of single pump (from 8 to 230 l/min at 1200 rpm) » six versions of double pump (from 55 to 370 l/min at 1200 rpm) With maximum powers of over 223 kW. BQ SERIES Fixed displacement hydraulic vane pumps. » five versions of single pump (from 8 to 230 l/min at 1200 rpm) » seven versions of double pump (from 55 to 370 l/min at 1200 rpm) With maximum powers of over 223 kW. TQ / TV SERIES Through-drive hydraulic vane pumps. Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five different displacements from 47 to 79 l/min at 1200 rpm and 7 bar. HQ SERIES Fixed displacement hydraulic vane pumps. » 2 versions of single pump (from 39 to 88 l/min at 1000 rpm) and » 2 versions of double pump (from 46 to 134 l/min at 1000 rpm) with Maximum powers of over 103 kW. B1 / B2 SERIES Fixed displacement hydraulic vane pumps. B1 pumps are available in eight different versions (from 4.5 to 31.8 l/pm at 1200 rpm), with maximum power of up to 18 kW. B2 pumps are available in seven different versions (from 27.27 to 59.09 l/pm at 1200 rpm), with maximum power of up to 27 kW. Hydraulic Vane Pumps High Pressure Hydraulic Vane Pump Types iii #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
Vane Pumps HQ Series iii #DriveLineHarmony www.jbj.co.uk/vane-pumps.html In addition to reliability, HQ pump guarantees continuous high volumetric efficiency during its whole service time. That avoids having to compensate the typical efficiency loss of other kinds of pump, increasing the truck engine RPM, which causes higher fuel consumption and therefore air pollution. Such characteristics, along with an extremely low noise-level, make the HQpump environmentally friendly, in line with the latest ecological trend. FixedDisplacement Hydraulic Vane Pumps “HQ” Series The design of the HQ series vane pumps makes them particularly suitable for application on trucks, especially garbage compactors.All the components subject to wear are contained in a cartridge unit that can be easily removed for inspection and/or replacement without disconnecting the pump from the circuit, drastically reducing expensivemachine downtime. The special design of the inner flexible plates of the cartridge enables any thermal expansion in the rotor to be compensated for and to adequately cope with any sudden change in pressure. Furthermore, the two opposed pumping chambers formed by the elliptical profile of the cam cancel out radial loads, dramatically reducing vibrations and considerably increasing the pump lifetime. The HQ series is available in 2 versions of single pump (from 39 to 88 l/min at 1000 rpm) and two versions of double pump (from 46 to 134 l/min at 1000 rpm) with maximumpowers of over 103 kW. The pumps are extremely compact and are supplied with different types of either ISO or UNI norm mounting for the direct coupling with PTO and SAE norm hydraulic fittings. That, together with the possibility to orientate the inlet and outlet ports, makes the HQ pumps very easy to install and guarantees their interchangeability with other types of pumps. 70 68 66 64 62 60 sound level at 140 bar (HQ02 pump) dB(A) 1000 rpm 1500 rpm 2000 rpm H Y D R A U L I C S
Vane Pumps Single Pump HQ02 Series 1 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in five different displacements from 39 to 66 l/min (from 10 to 17 gpm) at 1000 rpm and 7 bar. General description Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure (with mineral oil) : from -0,17 to +0,35 bar (-2.5 + 5 psi) Operating temperature: with mineral oil -10°C to +70°C (+30° C to +60° C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Rated capacity Maximum pressure Speed range at 1000 rpm 7 bar at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil rpm A02-12 40,1 (2.45) 39,1 (10.0) 46,9 (12) 58,8 (15.5) 210 (3050) 600 2700 A02-14 45,4 (2.77) 43,9 (11.7) 52,7 (14) 65,7 (17.4) 210 (3050) 600 2700 A02-17 55,2 (3.37) 53,5 (14.2) 64,2 (17) 80,2 (21.2) 210 (3050) 600 2500 A02-19 60,1 (3.66) 59,2 (15.8) 71,1 (19) 88,7 (23.4) 210 (3050) 600 2500 A02-21 3 cm /g 67,5 (4.12) 65,8 (17.5) 79,3 (21) 99,8 (26.4) 210 (3050) 600 2500 3 (in /r) l/min (gpm) l/min (gpm) l/min (gpm) bar (psi) min max H Y D R A U L I C S
250 200 150 100 50 0 max pressure / hydraulic fluid BAR Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. 3625 peak pres. (0,5 sec.max) 2900 2175 PSI 1450 725 0 max speed / hydraulic fluid (with 0 bar in the intake pipe) 3000 2500 2000 1500 1000 500 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid cart. 17 19 21 cart. 12 , 14 If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed. max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 Intake pipe pressure (BAR) 0,4 5,8 Main operating data Vane Pumps Single Pump HQ02 Series 2 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Single Pump HQ02 Series 3 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html flow / pressure 100 90 80 70 60 50 40 30 20 10 0 0 50 100 150 250 26 200 20,8 15,6 10,4 5,2 0 0 725 1450 2175 2900 3625 L / MIN PSI BAR GPM 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm power / pressure PSI 40 600 rpm BAR 35 30 25 20 15 10 5 0 0 50 100 150 200 0 725 1450 2175 2900 3625 250 KW HP 54,4 40,8 27,2 13,6 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI Inlet pressure: 0 BAR BAR 200 150 100 50 0 NM 0 725 1450 2175 2900 3625 0 50 100 150 200 250 flow / pressure 100 80 40 20 0 0 50 100 150 250 26 200 20,8 15,6 10,4 5,2 0 0 725 1450 2175 2900 3625 L / MIN PSI BAR GPM 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 60 120 power / pressure 31,2 PSI 40 BAR 35 30 25 20 15 10 5 0 0 50 100 150 200 0 725 1450 250 2175 2900 3625 KW HP 68 54,4 13,6 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 45 50 40,8 27,2 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI Inlet pressure: 0 BAR 200 150 100 50 0 NM 0 725 1450 2175 2900 3625 0 50 100 150 200 250 BAR Cartridge A02-12 Cartridge A02-14 H Y D R A U L I C S
Cartridge A02-17 Cartridge A02-19 BAR flow / pressure L / MIN PSI 0 20 40 60 80 100 120 140 36,4 0 50 100 150 200 250 31,2 26 20,8 15,6 10,4 5,2 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 725 1450 2175 2900 3625 power / pressure GPM 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm PSI 600 rpm 40 60 20 50 30 10 0 KW 81,6 BAR 68 54,4 40,8 27,2 13,6 0 0 50 100 150 200 250 HP Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI Inlet pressure: 0 BAR 250 200 150 100 50 0 0 725 1450 2175 2900 3625 0 50 100 150 200 250 BAR NM 0 725 1450 2175 2900 3625 160 140 120 100 80 60 40 20 0 L / MIN GPM flow / pressure PSI 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 41,6 36,4 31,2 26 20,8 15,6 10,4 5,2 0 0 50 100 150 200 250 BAR power / pressure 40 60 20 50 30 10 0 2500 rpm 0 50 100 150 200 250 BAR 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 725 1450 2175 2900 3625 81,6 68 54,4 40,8 27,2 13,6 0 HP KW PSI Oil viscosity: 25 c.St. (10W) Temperature: 45°C Inlet pressure: 0 BAR input torque / pressure PSI BAR 250 200 150 100 50 0 0 725 1450 2175 2900 3625 0 50 100 150 200 250 NM Vane Pumps Single Pump HQ02 Series 4 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Single Pump HQ02 Series 5 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Cartridge A02-21 flow / pressure PSI L / MIN GPM 180 160 140 120 100 80 60 40 20 0 725 1450 2175 2900 0 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 42 31,5 21 10,5 power / pressure 0 0 50 100 150 200 250 KW 0 10 20 30 40 50 60 PSI 0 70 BAR 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 95,2 81,6 68 54,4 40,8 27,2 13,6 0 HP 0 50 100 150 200 250 Oil viscosity: 25 c.St. (10W) Temperature: 45°C 0 Inlet pressure: 0 BAR 100 150 200 input torque / pressure 0 725 1450 2175 2900 250 PSI 3625 300 200 100 0 NM 50 BAR Installation dimensionsmm (inches) Approx. weight: 14,8 kg. (33 lbs.) H Y D R A U L I C S
Model code breakdown HQ 02 G (L) (*) * * * * * * Cartridge type 12 14 17 19 21 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Outlet port connection (omit if GAS threaded ) Pump type S= SAE port with 4 holes connection Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet inline with inlet D= Outlet 90° CW from inlet Seals (omit with standard seals and shaft-seals in NBR) V= seals and shaft-seals in ® FPM (Viton ) PORT ORIENTATIONS Shaft mm (inches) Shaft end Shaft 50 Pump series Design Vane Pumps Single Pump HQ02 Series 6 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html 50 = Splined shaft with ISO 14 four holes flange H Y D R A U L I C S
Vane Pumps Single Pump HQ02 Series 7 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Id. codes of pump components PART NO. M8020030 Bearing PART NO. M8020050 Seeger PART NO. M8020040 Seeger PART NO. M8020020 Cover PART NO. M8020070 Screw Torque to 102 Nm (910 lb. in.) Shaft Model PART NO. 50 K0250000 Shaft kit Model PART NO. 50 M6025000 M8020060 NBR M8020065 FPM Shaft seal PART NO. Type Pump seal kit PART NO. Parts Type M6025500 seals + 2 shaft seals NBR M6025510 seals + 2 shaft seals FPM (Viton®) PART NO. M6000010 Seeger Cartridge Series Model PART NO. PUMP ROTAT. 12 A0212030 14 A0214070 A02 17 A0217110 right hand 19 A0219150 21 A0221190 12 A0212040 14 A0214080 A02 17 A0217120 left hand 19 A0219160 21 A0221200 Model PART NO. STD M8020016 S M8020017 Body H Y D R A U L I C S
Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in two different displacements from 75 to 88 l/min (from 20 to 23 gpm) at 1000 rpm and 7 bar. General description Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure (with mineral oil) : from -0,17 to +0,35 bar (-2.5 + 5 psi) Operating temperature: with mineral oil -10°C to +70°C (+30° C to +60° C recommended) . Drive: direct and coaxial by means of a flexible coupling. A03-24 78,3 (4.78) 75,0 (20.0) 90 (24) 115,3 (30.5) 210 (3050) 600 2500 A03-28 3 cm /g 91,2 (5.56) 88,3 (23.3) 106 (28) 131,8 (34.8) 210 (3050) 600 2500 3 (in /r) l/min (gpm) l/min (gpm) l/min (gpm) bar (psi) min max Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Rated capacity Maximum pressure Speed range at 1000 rpm 7 bar at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil rpm Vane Pumps Single Pump HQ03 Series 8 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Single Pump HQ03 Series 9 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Cartridge A03-24 max speed / intake pipe pressure % connection factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 Intake pipe pressure (BAR) 0,4 5,8 max pressure / hydraulic fluid BAR 250 200 150 100 50 0 Antiwear industrial hydraulic oil Syntetic fire resistant fluid 3625 max pres. peak pres. (0,5 sec.max) 2900 2175 1450 725 0 PSI Main operating data Oil viscosity: 25 c.St. (10W) Temperature: 45°C flow / pressure PSI Inlet pressure: 0 BAR L / MIN GPM 200 160 140 120 100 80 60 40 20 0 725 1450 0 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 52 41,6 31,2 20,8 0 0 50 100 150 200 250 power / pressure 180 10,4 KW 0 10 20 30 40 50 60 PSI 0 70 BAR 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 108,8 81,6 54,4 27,2 0 HP 0 50 100 150 200 250 0 100 150 200 input torque / pressure 0 250 725 1450 2175 2900 PSI 3625 400 200 100 0 NM 50 BAR 300 If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed. max speed / hydraulic fluid RPM 3000 2500 2000 1500 500 0 Antiwear industrial hydraulic oil Syntetic fire resistant fluid 1000 (with 0 bar in the intake pipe) H Y D R A U L I C S
Cartridge A03-28 Oil viscosity: 25 c.St. (10W) Temperature: 45°C 0 Inlet pressure: 0 BAR 100 150 200 input torque / pressure PSI 0 725 1450 2175 2900 3625 250 400 200 100 0 NM 50 BAR power / pressure 300 KW 0 10 20 30 40 50 60 PSI 0 725 1450 2175 2900 3625 70 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 108,8 81,6 54,4 27,2 0 HP 0 50 100 150 200 250 80 flow / pressure PSI 90 L / MIN GPM 250 150 100 50 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 66 52,8 39,6 26,4 0 0 50 100 150 200 250 200 13,2 1800 rpm Installation dimensionsmm (inches) Approx. weight: 17 kg. (37 lbs.) Vane Pumps Single Pump HQ03 Series 10 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Single Pump HQ03 Series 11 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html PORT ORIENTATIONS Shaft mm (inches) Model code breakdown HQ 03 G (L) (*) * * * * * * Cartridge type 24 28 Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Outlet port connection (omit if GAS threaded ) Pump type S= SAE port with 4 holes connection Outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet inline with inlet D= Outlet 90° CW from inlet Seals (omit with standard seals and shaft-seals in NBR) V= seals and shaft-seals in ® FPM (Viton ) Shaft end = Splined shaft with ISO 14 four holes flange 50 Pump series Design Shaft 50 H Y D R A U L I C S
Id. codes of pump components PART NO. M8020030 Bearing PART NO. M8020050 Seeger PART NO. M8020040 Seeger PART NO. M8030020 Cover PART NO. M8020090 Screw Torque to 102 Nm (910 lb. in.) Shaft Model PART NO. 50 K0350000 Shaft kit Model PART NO. 50 M6035000 M8020060 NBR M8020065 FPM Shaft seal PART NO. Type Pump seal kit PART NO. Parts Type M6025500 seals + 2 shaft seals NBR M6025510 seals + 2 shaft seals FPM (Viton®) PART NO. M6000010 Seeger cartridge Series Model PART NO. PUMP ROTAT. 24 A0324030 A03 28 A0328070 right hand 24 A0324040 A03 28 A0328080 left hand Model PART NO. STD M8020016 S M8020017 Body Vane Pumps Single Pump HQ03 Series 12 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Double Pump HQ21 Series 13 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in several versions with rated capacities from 46 to 111 l/min (from 12 to 29 gpm) at 1000 rpm and 7 bar. General description Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure (with mineral oil) : from -0,17 to +0,35 bar (-2.5 + 5 psi) Operating temperature: with mineral oil -10°C to +70°C (+30° C to +60° C recommended) . Drive: direct and coaxial by means of a flexible coupling. Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Rated capacity Maximum pressure Speed range at 1000 rpm 7 bar at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil rpm A02-12 40,1 (2.45) 39,1 (10.0) 46,9 (12) 58,8 (15.5) 210 (3050) 600 2700 A02-14 45,4 (2.77) 43,9 (11.7) 52,7 (14) 65,7 (17.4) 210 (3050) 600 2700 A02-17 55,2 (3.37) 53,5 (14.2) 64,2 (17) 80,2 (21.2) 210 (3050) 600 2500 A02-19 60,1 (3.66) 59,2 (15.8) 71,1 (19) 88,7 (23.4) 210 (3050) 600 2500 A02-21 3 cm /g 67,5 (4.12) 65,8 (17.5) 79,3 (21) 99,8 (26.4) 210 (3050) 600 2500 3 (in /r) l/min (gpm) l/min (gpm) l/min (gpm) bar (psi) min max shaft end A01-02 7,2 (0.44) 6,9 (1.7) 8,3 (2) 10,4 (2.8) 210 (3050) 600 2700 A01-05 18,1 (1.10) 17,3 (4.2) 20,8 (5) 26,1 (6.9) 210 (3050) 600 2700 A01-08 27,4 (1.67) 26,5 (6.7) 31,8 (8) 39,4 (10.4) 210 (3050) 600 2700 A01-09 30,1 (1.83) 29,2 (7.5) 35,1 (9) 44,1 (11.7) 210 (3050) 600 2700 A01-11 36,4 (2.22) 35,3 (9.2) 42,4 (11) 52,6 (13.9) 210 (3050) 600 2700 A01-12 39,5 (2.41) 39,1 (10.0) 46,9 (12) 58,7 (15.5) 160 (2300) 600 2700 A01-14 3 cm /g 45,9 (2.79) 45,8 (11.7) 54,9 (14) 69,6 (18.4) 140 (2030) 600 2700 3 (in /r) l/min (gpm) l/min (gpm) l/min (gpm) bar (psi) min max cover end H Y D R A U L I C S
Main operating data If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed. Oil viscosity: 25 c.St. (10W) Temperature: 45°C Inlet pressure: 0 BAR max pressure / hydraulic fluid BAR 250 200 150 100 50 0 Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. 3625 peak pres. (0,5 sec.max) 2900 2175 1450 725 0 PSI max speed / hydraulic fluid RPM 3000 2500 2000 1500 500 0 Antiwear industrial hydraulic oil Syntetic fire resistant fluid 1000 (with 0 bar in the intake pipe) cart 12, 14 cart 17, 19, 21 max speed / intake pipe pressure % connection factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 Intake pipe pressure (BAR) 0,4 5,8 flow / pressure PSI L / MIN GPM 100 80 70 60 50 40 30 20 10 0 725 1450 2175 2900 0 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 26 20,8 15,6 10,4 0 0 50 100 150 200 250 power / pressure 90 5,2 KW 0 10 15 20 25 30 35 PSI 0 725 1450 2175 2900 3625 40 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 40,8 13,6 27,2 0 HP 0 50 100 150 200 250 5 0 100 input torque / pressure 0 725 1450 150 200 250 PSI 2175 2900 3625 200 100 50 0 NM 50 BAR 150 Shaft end cartridge A02-12 Vane Pumps Double Pump HQ21 Series 14 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Double Pump HQ21 Series 15 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Shaft end cartridge A02-14 flow / pressure PSI Shaft end cartridge A02-17 L / MIN GPM 120 60 40 20 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 26 20,8 15,6 10,4 0 0 50 100 150 200 250 power / pressure 31,2 100 80 5,2 KW 10 20 25 30 35 40 45 PSI 0 725 1450 2175 2900 3625 50 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 54,4 40,8 13,6 27,2 0 HP 0 50 100 150 200 250 15 5 68 0 PSI L / MIN GPM 140 80 60 40 0 20 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 31,2 26 15,6 10,4 0 0 50 100 150 200 250 120 5,2 36,4 100 flow / pressure 20,8 0 KW 0 10 20 60 30 50 PSI 0 725 1450 2175 2900 3625 40 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 54,4 0 HP 0 50 100 150 200 250 power / pressure 27,2 13,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure 0 0 100 150 200 250 Inlet pressure: 0 BAR 725 1450 2175 2900 PSI 3625 200 100 50 0 NM 50 BAR 150 Oil viscosity: 25 c.St. (10W) Temperature: 45°C 0 Inlet pressure: 0 BAR 100 input torque / pressure PSI 0 725 1450 2175 2900 3625 150 200 250 200 100 50 0 NM 50 150 250 BAR H Y D R A U L I C S
Shaft end cartridge A02-19 Shaft end cartridge A02-21 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 200 100 0 NM 50 300 BAR KW 0 10 20 60 30 50 40 PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 54,4 0 HP power / pressure 27,2 0 50 100 150 200 250 13,6 flow / pressure PSI 95,2 70 L / MIN GPM 160 80 40 20 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 31,5 21 0 0 50 100 150 200 250 42 140 120 100 180 60 10,5 0 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 200 100 50 0 NM 50 150 250 BAR flow / pressure PSI L / MIN GPM 160 80 40 20 0 725 1450 2175 2900 0 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 36,4 31,2 26 20,8 0 0 50 100 150 200 250 140 5,2 41,6 120 100 15,6 60 10,4 BAR KW 0 10 20 60 30 50 PSI 0 725 1450 2175 2900 3625 40 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 81,6 68 40,8 54,4 0 HP 0 50 100 150 200 250 power / pressure 27,2 13,6 Vane Pumps Double Pump HQ21 Series 16 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Double Pump HQ21 Series 17 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Cover end cartridge A01-05 Oil viscosity: 25 c.St.(10W) Temperature: 45°C 0 Inlet pressure: 0 BAR 100 input torque / pressure PSI 0 725 1450 2175 2900 3625 150 200 250 80 40 20 0 NM BAR 50 power / pressure 60 KW 0 2 4 6 8 10 12 14 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 21,6 16,2 10,8 5,4 0 HP 0 50 100 150 200 250 16 flow / pressure PSI 18 l/min GPM 45 35 15 10 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 10,4 7,8 5,2 0 0 50 100 150 200 250 40 2,6 30 25 20 1200 rpm 5 1500 rpm 1800 rpm 2500 rpm l/min GPM 16 6 2 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 14 2,8 12 8 BAR 20 4,16 KW 0 1 BAR 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 8,16 0 HP 0 50 100 150 200 250 3 5 7 8 5,44 2,72 0 100 150 200 250 0 725 1450 2175 2900 3625 10 0 NM 50 30 40 BAR 5,2 3,12 1,04 10,9 4 10 18 2 4 6 20 Cover end cartridge A01-02 Oil viscosity: 25 c.St.(10W) Temperature: 45°C flow / pressure PSI power / pressure PSI input torque / pressure PSI Inlet pressure: 0 BAR H Y D R A U L I C S
Cover end cartridge A01-08 flow / pressure PSI l/min GPM 60 20 10 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 13 30 BAR 70 15,6 5,2 KW 0 5 BAR PSI 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 power / pressure 150 200 250 10 15 20 25 20,4 13,6 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 50 0 NM 50 100 150 BAR 18,2 10,4 2,6 34 BAR 0 100 150 200 250 0 725 1450 2175 2900 3625 50 0 NM 50 100 150 BAR l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 80 15,6 5,2 20,8 10,4 2,6 18,2 70 KW 0 5 BAR 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 10 15 20 30 20,4 13,6 6,8 40,8 25 34 Cover end cartridge A01-09 flow / pressure PSI power / pressure PSI Oil viscosity: 25 c.St.(10W) Temperature: 45°C input torque / pressure PSI Inlet pressure: 0 BAR Vane Pumps Double Pump HQ21 Series 18 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Double Pump HQ21 Series 19 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Cover end cartridge A01-11 Cover end cartridge A01-12 flow / pressure PSI L / MIN GPM 80 40 20 10 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 70 10,6 60 50 15,9 30 BAR 90 21,2 5,3 KW 0 PSI 0 725 1450 2175 2900 3625 5 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 25 30 35 40,8 20,4 6,8 34 27,2 13,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 50 0 NM 50 100 150 BAR KW PSI 0 725 1450 2175 2900 3625 0 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 40,8 0 HP 0 50 100 power / pressure 150 200 250 5 10 15 20 25 30 27,2 20,4 13,6 34 6,8 flow / pressure PSI L / MIN GPM 50 20 10 0 725 1450 2175 2900 0 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 10,4 0 0 50 100 150 200 20,8 30 BAR 26 60 40 5,2 70 80 90 100 15,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 0 100 150 200 Inlet pressure: 0 BAR 100 50 0 NM 50 150 BAR H Y D R A U L I C S
Cover end cartridge A01-14 flow / pressure PSI L / MIN GPM 80 40 20 0 725 1450 2175 2900 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 10,6 0 0 50 100 150 200 21,2 100 15,9 60 BAR 120 5,3 KW 0 PSI 0 725 1450 2175 2900 5 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 0 HP 0 50 100 power / pressure 150 200 10 15 20 25 30 40,8 20,4 6,8 34 27,2 13,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure 0 725 1450 2175 2900 0 100 150 200 Inlet pressure: 0 BAR 50 0 NM 50 100 150 BAR PSI 200 Installation dimensionsmm (inches) Approx. weight: 20,5 kg. (45 lbs.) Vane Pumps Double Pump HQ21 Series 20 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
50 = Splined shaft with ISO 14 four holes flange Vane Pumps Double Pump HQ21 Series 21 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html Model code breakdown HQ 21 G (L) (*) * * * * * * * Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Outlet port connection (omit if GAS threaded ) Pump type S= SAE port with 4 holes connection Seals (omit with standard seals and shaft-seals in NBR) V= seals and shaft-seals in ® FPM (Viton ) Shaft end Cartridge types - shaft end 12 14 17 19 21 - cover end 02 05 08 09 11 12 14 Body outlet port positions (outlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Cover outlet port positions (outlet viewed from cover end) A= Outlet 135° CCW from inlet B= Outlet 45° CCW from inlet C= Outlet 45° CW from inlet D= Outlet 135° CW from inlet Pump series Design Shaft mm (inches) PORT ORIENTATIONS Shaft 50 H Y D R A U L I C S
Id. codes of pump components Shaft Model PART NO. 50 K2150000 Shaft kit Model PART NO. 50 M6215000 M8020060 NBR M8020065 FPM Shaft seal PART NO. Type Pump seal kit PART NO. Parts Type M6215500 seals + 2 shaft seals NBR M6215510 seals + 2 shaft seals FPM (Viton®) PART NO. M6000010 Seeger PART NO. M8020030 Bearing PART NO. M8020050 Seeger PART NO. M8020040 Seeger PART NO. M8020420 Screw Torque to 70 Nm (624 lb. in.) PART NO. M8020130 Screw Torque to 102 Nm (910 lb. in.) PART NO. M8020110 Inlet body Cartridges Series A01 A01 Model 02 05 08 09 11 12 14 02 05 08 09 11 12 14 Part No. A0102000 A0105010 A0108030 A0109050 A0111070 A0112090 A0114110 A0102005 A0105020 A0108040 A0109060 A0111080 A0112100 A0114120 Series A02 A02 Model 12 14 17 19 21 12 14 17 19 21 Part No. A0212030 A0214070 A0217110 A0219150 A0221190 A0212040 A0214080 A0217120 A0219160 A0221200 Pump rotaion right hand left hand Cover end Shaft end Model PART NO. STD M8020016 S M8020017 Body Model PART NO. STD M8020121 S M8020120 Cover Vane Pumps Double Pump HQ21 Series 22 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Double Pump HQ22 Series 23 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html P1 P2 S Technical caracteristics (P1 and P2 sections) General description Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in several versions with rated capacity from 52 to 131 l/min (from 14 to 35 gpm) at 1000 rpm and 7 bar pressure. Hydraulic fluids: antiwear high quality mineral oils or fluid based on phosphate ester. Viscosity range: (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended). Filtration: for the inlet - not less than 149 micron abs., for the return line - 25 micron abs. or smaller (with synthetic fluids: for the return line - 10 micron abs. or smaller). Inlet pressure: (with mineral oil): from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended), with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Cartridge model Geometric displacement Rated capacity at 1000 rpm 7 bar Rated capacity at 1500 rpm 7 bar Maximum pressure with mineral oil Speed range rpm cm3/g (in3/r) l/min (gpm) l/min (gpm) bar (psi) min max A02-08 27,0 (1.64) 26,1 (6.9) 39,1 (10) 210 (3050) 600 2700 A02-12 40,1 (2.45) 39,1 (10) 58,8 (15.5) 210 (3050) 600 2700 A02-14 45,4 (2.77) 43,9 (11.7) 65,7 (17.4) 210 (3050) 600 2700 A02-17 55,2 (3.37) 53,5 (14.2) 80,2 (21.2) 210 (3050) 600 2500 A02-19 60,0 (3.66) 59,2 (15.8) 88,7 (23.4) 210 (3050) 600 2500 A02-21 67,5 (4.12) 65,8 (17.5) 99,8 (26.4) 210 (3050) 600 2500 H Y D R A U L I C S
No. 4 holes 3/8" 16UNC -19 deep Inlet Ø63.5 (2.5”) Outlet Ø25.4 (1”) Outlet Ø31.8 (1.25”) 5/8" 11UNC –28 deep 7/16" 14UNC –22 deep P1 P2 S P1 optional outlet 0 500 1000 1500 2000 2500 3000 -2,9 -1,45 0 1,45 2,9 4,35 5,8 92% 94% 96% 98% 100% 102% 104% 106% -0,2 -0,1 0 0,1 0,2 0,3 0,4 0 725 1450 2175 2900 3625 0 50 100 150 200 250 max speed / fluid type (with 0 bar in the intake pipe) Main operating data If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure sound level for each section at 138 bar (2000 psi), cart. A02-17 dB(A) max pressure / fluid type Installation dimensionsmm [inches] Approx. weigth: 22 Kg (63 lbs) Antiwear industrial hydraulic oil Ester phosphate fluid max pressure peak pressure (0.5 sec. max) PSI BAR Antiwear hydraulic oil Ester phosphate fluid RPM BAR PSI % factor for the max speed Intake pipe pressure rpm 8,12,14 sizes 17,19,21 sizes 56 58 60 62 64 66 68 70 1000 1500 2000 Ports standard version: B Vane Pumps Double Pump HQ22 Series 24 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Vane Pumps Double Pump HQ22 Series 25 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html C C D D A B B A mm [inches] Shaft options Model code breakdown HQ 22 G ** ** * * ** * * * Shaft end options 50= Splined shaft with 4 holes flange ISO 14 Pump series Design Pump type 08 12 14 17 19 21 Cartridge model (P1 and P2 sections) Body outlet port positions (outlet viewed from cover-end) A= Outlet opposite end B= Outlet 90°CCW from inlet C= Oulet inline with inlet D= Outlet 90°CW from inlet Seals Rotation (omit with standard seals and shaft-seals in NBR) V= seals and shaft-seals in FPM (Viton®) E= seals and double shaft -seals in EPDMin EPDM (viewed from shaft-end) L= Left hand rotation CCW (omit if CW) Cover outlet port positions (outlet viewed from cover-end) A= Outlet opposite end B= Outlet 90°CCW from inlet C= Oulet inline with inlet D= Outlet 90°CW from inlet Type 50 Outlet orientations Port options A= S-2”1/2; P1-1”BSPP; P2-1” Sae B= S-2”1/2; P1-1.25”Sae; P2-1” Sae “B” is the standard version H Y D R A U L I C S
Id. codes of pump components Seeger Part No. M8020040 Bearing Part No. M8020035 Pump body Port BSPP 1” M8020016 Port SAE 1”1/4 M8020017 Pump cover Part No. M8050350 Seeger Part No. M8020050 Cartridges Series Model cover end shaft end Pump rotation Part No. Part No. A02 8 A0208347 A0208320 right hand 12 A0212047 A0212020 14 A0214087 A0214060 17 A0217127 A0217100 19 A0219167 A0219140 21 A0221207 A0221180 A02 8 A0208337 A0208310 left hand 12 A0212037 A0212010 14 A0214077 A0214050 17 A0217117 A0217090 19 A0219157 A0219130 21 A0221197 A0221170 Screw Part No. M8020140 Torque to 102 Nm (910 lb.in.) Shaft kit Shaft type Part No. 50 M6225000 Inlet body Part No. M8020112 Shaft Type Part No. 50 K2250000 Shaft-seal Part No. Type M8020060 NBR M8020065 FPM M8020067 EPDM Pump seal kit Part No. Parts Type M6335500 NBR M6335510 seals + shaft-seals FPM (Viton®) M6050520 EPDM Seeger Part No. M6000010 Vane Pumps Double Pump HQ22 Series 26 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in several versions with rated capacities from 82 to 134 l/min (from 22 to 35 gpm) at 1000 rpm and 7 bar. General description Hydraulic fluids: mineral oils, phosphate ester based fluids. Viscosity range (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended) . Filtration: for the inlet - 149 micron abs., for the return line - 25 micron abs. or better (with synthetic fluids: for the return line - 10 micron abs. or better) . Inlet pressure (with mineral oil) : from -0,17 to +0,35 bar (-2.5 + 5 psi) Operating temperature: with mineral oil -10°C to +70°C (+30° C to +60° C recommended) . Drive: direct and coaxial by means of a flexible coupling. A03-24 78,3 (4.78) 75,0 (20.0) 90 (24) 115,3 (30.5) 210 (3050) 600 2500 A03-28 3 cm /g 91,2 (5.56) 88,3 (23.3) 106 (28) 131,8 (34.8) 210 (3050) 600 2500 3 (in /r) l/min (gpm) l/min (gpm) l/min (gpm) bar (psi) min max shaft end Technical characteristics Cartridge model Geometric displacement Rated capacity Rated capacity Rated capacity Maximum pressure Speed range at 1000 rpm 7 bar at 1200 rpm 7 bar at 1500 rpm 7 bar with mineral oil rpm A01-02 7,2 (0.44) 6,9 (1.7) 8,3 (2) 10,4 (2.8) 210 (3050) 600 2700 A01-05 18,1 (1.10) 17,3 (4.2) 20,8 (5) 26,1 (6.9) 210 (3050) 600 2700 A01-08 27,4 (1.67) 26,5 (6.7) 31,8 (8) 39,4 (10.4) 210 (3050) 600 2700 A01-09 30,1 (1.83) 29,2 (7.5) 35,1 (9) 44,1 (11.7) 210 (3050) 600 2700 A01-11 36,4 (2.22) 35,3 (9.2) 42,4 (11) 52,6 (13.9) 210 (3050) 600 2700 A01-12 39,5 (2.41) 39,1 (10.0) 46,9 (12) 58,7 (15.5) 160 (2300) 600 2700 A01-14 3 cm /g 45,9 (2.79) 45,8 (11.7) 54,9 (14) 69,6 (18.4) 140 (2030) 600 2700 3 (in /r) l/min (gpm) l/min (gpm) l/min (gpm) bar (psi) min max cover end Vane Pumps Double Pump HQ31 Series 27 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
250 200 150 100 50 0 max pressure / hydraulic fluid BAR Antiwear industrial hydraulic oil Syntetic fire resistant fluid max pres. 3625 peak pres. (0,5 sec.max) 2900 2175 PSI 1450 725 0 max speed / hydraulic fluid (with 0 bar in the intake pipe) If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed. max speed / intake pipe pressure % correction factor for the max speed 106% 104% 102% 100% 98% 96% 94% 92% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 Intake pipe pressure (BAR) 0,4 5,8 Main operating data 3000 2500 2000 1500 1000 500 0 RPM Olio min. con addittivi antiusura Fluido sintetico Vane Pumps Double Pump HQ31 Series 28 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
Shaft end cartridge A03-24 Oil viscosity: 25 c.St. (10W) Temperature: 45°C flow / pressure PSI Inlet pressure: 0 BAR L / MIN GPM 200 160 140 120 100 80 60 40 20 0 725 1450 2175 2900 0 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 52 41,6 31,2 20,8 0 0 50 100 150 200 250 power / pressure 180 10,4 KW 0 10 20 30 40 50 60 PSI 0 725 1450 2175 2900 3625 70 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 108,8 81,6 54,4 27,2 0 HP 0 50 100 150 200 250 input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 400 200 100 0 NM 50 BAR 300 Shaft end cartridge A03-28 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 400 200 100 0 NM 50 BAR power / pressure 300 KW 0 10 20 30 40 50 60 PSI 0 725 1450 2175 2900 3625 70 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 108,8 81,6 54,4 27,2 0 HP 0 50 100 150 200 250 80 flow / pressure PSI 90 L / MIN GPM 250 150 100 50 0 725 1450 2175 2900 0 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm BAR 66 52,8 39,6 26,4 0 0 50 100 150 200 250 200 13,2 1800 rpm Vane Pumps Double Pump HQ31 Series 29 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html H Y D R A U L I C S
H Y D R A U L I C S l/min GPM 16 6 2 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 14 2,8 12 8 BAR 20 4,16 KW 0 1 BAR 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 8,16 0 HP 0 50 100 150 200 250 3 5 7 8 5,44 2,72 0 100 150 200 250 0 725 1450 2175 2900 3625 10 0 NM 50 30 40 BAR 5,2 3,12 1,04 10,9 4 10 18 2 4 6 20 Cover end cartridge A01-02 Oil viscosity: 25 c.St.(10W) Temperature: 45°C flow / pressure PSI power / pressure PSI input torque / pressure PSI Inlet pressure: 0 BAR Cover end cartridge A01-05 Oil viscosity: 25 c.St.(10W) Temperature: 45°C 0 Inlet pressure: 0 BAR 100 input torque / pressure PSI 0 725 1450 2175 2900 3625 150 200 250 80 40 20 0 NM 50 BAR power / pressure 60 KW 0 2 4 6 8 10 12 PSI 0 725 1450 2175 2900 3625 14 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 21,6 16,2 10,8 5,4 0 HP 0 50 100 150 200 250 16 flow / pressure PSI 18 l/min GPM 45 35 15 10 0 0 725 1450 2175 2900 3625 1000 rpm 600 rpm BAR 10,4 7,8 5,2 0 0 50 100 150 200 250 40 2,6 30 25 20 1200 rpm 5 1500 rpm 1800 rpm 2500 rpm Vane Pumps Double Pump HQ31 Series 30 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
Cover end cartridge A01-08 flow / pressure PSI l/min GPM 60 20 10 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 13 30 BAR 70 15,6 5,2 KW 0 PSI 0 725 1450 2175 2900 3625 5 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 power / pressure 150 200 250 10 15 20 25 20,4 13,6 6,8 Oil viscosity: 25 c.St.(10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 50 0 NM 50 100 18,2 150 BAR 10,4 2,6 34 BAR 0 100 150 200 250 0 725 1450 2175 2900 3625 50 0 NM 50 100 150 BAR l/min GPM 60 20 10 0 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 50 7,8 40 30 13 80 15,6 5,2 20,8 10,4 2,6 18,2 70 KW 0 5 BAR 0 725 1450 2175 2900 3625 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 27,2 0 HP 0 50 100 150 200 250 10 15 20 30 20,4 13,6 6,8 40,8 25 34 Cover end cartridge A01-09 flow / pressure PSI power / pressure PSI Oil viscosity: 25 c.St.(10W) Temperature: 45°C input torque / pressure PSI Inlet pressure: 0 BAR H Y D R A U L I C S Vane Pumps Double Pump HQ31 Series 31 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
H Y D R A U L I C S Cover end cartridge A01-11 flow / pressure PSI L / MIN GPM 80 40 20 10 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 0 0 50 100 150 200 250 70 10,6 60 50 15,9 30 BAR 90 21,2 5,3 KW 0 PSI 0 725 1450 2175 2900 3625 5 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 0 HP 0 50 100 150 200 250 power / pressure 10 15 20 25 30 35 40,8 20,4 6,8 34 27,2 13,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 3625 0 100 150 200 250 Inlet pressure: 0 BAR 50 0 NM 50 100 150 BAR Cover end cartridge A01-12 KW PSI 0 725 1450 2175 2900 3625 0 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 40,8 0 HP 0 50 100 power / pressure 150 200 250 5 10 15 20 25 30 27,2 20,4 13,6 34 6,8 flow / pressure PSI L / MIN GPM 50 20 10 0 725 1450 2175 2900 3625 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 10,4 0 0 50 100 150 200 20,8 30 BAR 26 60 40 5,2 70 80 90 100 15,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure PSI 0 725 1450 2175 2900 0 100 150 200 Inlet pressure: 0 BAR 100 50 0 NM 50 150 BAR Vane Pumps Double Pump HQ31 Series 32 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
Cover end cartridge A01-14 flow / pressure PSI L / MIN GPM 80 40 20 0 725 1450 2175 2900 0 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 10,6 0 0 50 100 150 200 21,2 100 15,9 60 BAR 120 5,3 KW 0 PSI 0 725 1450 2175 2900 5 BAR 2500 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 47,6 0 HP 0 50 100 power / pressure 150 200 10 15 20 25 30 40,8 20,4 6,8 34 27,2 13,6 Oil viscosity: 25 c.St. (10W) Temperature: 45°C input torque / pressure 0 725 1450 2175 2900 0 100 150 200 Inlet pressure: 0 BAR 50 0 NM 50 100 150 BAR PSI 200 Installation dimensionsmm (inches) Approx. weight: 22,7 kg. (50 lbs.) H Y D R A U L I C S Vane Pumps Double Pump HQ31 Series 33 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
H Y D R A U L I C S Model code breakdown HQ 31 G (L) (*) * * * * * * * Rotation (viewed from shaft end) L= left hand rotation CCW (omit if CW) Outlet port connection (omit if GAS threaded ) Pump type S= SAE port with 4 holes connection Seals ((mit with standard seals and shaft-seals in NBR) V= seals and shaft-seals in ® FPM (Viton ) Shaft end Cartridge types - shaft end 24 28 - cover end 02 05 08 09 11 12 14 Body outlet port positions (utlet viewed from cover end) A= Outlet opposite end B= Outlet 90° CCW from inlet C= Outlet in line with inlet D= Outlet 90° CW from inlet Cover outlet port positions (outlet viewed from cover end) A= Outlet 135° CCW from inlet B= Outlet 45° CCW from inlet C= Outlet 45° CW from inlet D= Outlet 135° CW from inlet Pump series Design Shaft mm (inches) PORT ORIENTATIONS Shaft 50 50 = Splined shaft with ISO 14 four holes flange Vane Pumps Double Pump HQ31 Series 34 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
Id. codes of pump components Shaft Model PART NO. 50 K3150000 Shaft kit Model PART NO. 50 M6315000 M8020060 NBR M8020065 FPM Shaft seal PART NO. Type Pump seal kit PART NO. Parts Type M6215500 seals + 2 shaft seals NBR M6215510 seals + 2 shaft seals FPM (Viton®) PART NO. M6000010 Seeger PART NO. M8020030 Bearing PART NO. M8020050 Seeger PART NO. M8020040 Seeger PART NO. M8020420 Screw Torque to 70 Nm (624 lb. in.) PART NO. M6000130 Screw Torque to 102 Nm (910 lb. in.) PART NO. M8020115 Inlet body Cartridges Series A01 A01 Model 02 05 08 09 11 12 14 02 05 08 09 11 12 14 Part No. A0102000 A0105010 A0108030 A0109050 A0111070 A0112090 A0114110 A0102005 A0105020 A0108040 A0109060 A0111080 A0112100 A0114120 Series A03 A03 Model 24 28 24 28 Part No. A0324030 A0328070 A0324040 A0328080 Pump rotation right hand left hand Cover end Shaft end Model PART NO. STD M8020016 S M8020017 Body Model PART NO. STD M8020121 S M8020120 Cover H Y D R A U L I C S Vane Pumps Double Pump HQ31 Series 35 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
H Y D R A U L I C S Vane Pumps Double Pump HQ33 Series 36 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html P1 P2 S Technical caracteristics (P1 and P2 sections) General description Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of cartridge used and the speed of rotation. The pump is available in several versions with rated capacity from 156 to 182 l/min (from 41 to 48 gpm) at 1000 rpm and 7 bar pressure. Hydraulic fluids: antiwear high quality mineral oils or fluid based on phosphate ester. Viscosity range: (with mineral oil) : from 13 to 860 cSt. (13 to 54 cSt. recommended). Filtration: for the inlet - not less than 149 micron abs., for the return line - 25 micron abs. or smaller (with synthetic fluids: for the return line - 10 micron abs. or smaller). Inlet pressure: (with mineral oil): from -0,17 to +1,4 bar (-2.5 to + 20 psi) Operating temperature: with mineral oil -10°C +70°C (+30°C to +60°C recommended), with water based fluids +15°C to +50°C. Drive: direct and coaxial by means of a flexible coupling. Cartridge model Geometric displacement Rated capacity at 1000 rpm 7 bar Rated capacity at 1500 rpm 7 bar Maximum pressure with mineral oil Speed range rpm cm3/g (in3/r) l/min (gpm) l/min (gpm) bar (psi) min max A03-24 78,3 (4.78) 78 (24) 115,3 (30.5) 210 (3050) 600 2500 A03-28 91,2 (5.56) 91 (28) 131,8 (34.8) 210 (3050) 600 2500
-2,9 -1,45 0 1,45 2,9 4,35 5,8 92% 94% 96% 98% 100% 102% 104% 106% -0,2 -0,1 0 0,1 0,2 0,3 0,4 0 500 1000 1500 2000 2500 3000 0 725 1450 2175 2900 3625 0 50 100 150 200 250 max speed / fluid type (with 0 bar in the intake pipe) Main operating data If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed max speed / intake pipe pressure sound level for each section at 138 bar (2000 psi), cart. A03-24 dB(A) max pressure / fluid type Installation dimensionsmm [inches] Approx. weigth: 29 Kg (63 lbs) Antiwear industrial hydraulic oil Ester phosphate fluid max pressure peak pressure (0.5 sec. max) PSI BAR Antiwear industrial hydraulic oil Ester phosphate fluid RPM BAR PSI % factor for the max speed Intake pipe pressure 58 60 62 64 66 68 70 1000 1500 2000 No. 4 holes Inlet Ø63.5 (2.5”) 3/8" 16UNC -19 deep 1/2"-13 UNC deep 24 Inlet Ø76.2 (3”) Outlet Ø25.4 (1”) Outlet Ø31.8 (1.25”) 5/8" 11UNC –28 deep 7/16" 14UNC –22 deep P1 P2 S STANDARD VERSION - ”D” P1 optional outlet S optional inlet rpm H Y D R A U L I C S Vane Pumps Double Pump HQ33 Series 37 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
H Y D R A U L I C S mm [inches] Shaft options Model code breakdown HQ 33 G ** ** * * ** * * * Shaft end options 50= Splined shaft with 4 holes flange ISO 14 Pump series Design Pump type 24 28 Cartridge model (P1 and P2 sections) Body outlet port positions (outlet viewed from cover-end) A= Outlet opposite end B= Outlet 90°CCW from inlet C= Oulet inline with inlet D= Outlet 90°CW from inlet Seals Rotation (omit with standard seals and shaft-seals in NBR) V= seals and shaft-seals in FPM (Viton®) E= seals and double shaft -seals in EPDMin EPDM (viewed from shaft-end) L= Left hand rotation CCW (omit if CW) Cover outlet port positions (outlet viewed from cover-end) A= Outlet opposite end B= Outlet 90°CCW from inlet C= Oulet inline with inlet D= Outlet 90°CW from inlet Type 50 Outlet orientations Port options A= S-2”1/2; P1-1”BSPP; P2-1” Sae B= S-2”1/2; P1-1.25”Sae; P2-1” Sae C= S-3”; P1-1”BSPP; P2-1” Sae D= S-3”; P1-1.25”Sae; P2-1” Sae “D” is the standard version C C D D A B B A Vane Pumps Double Pump HQ33 Series 38 #DriveLineHarmony www.jbj.co.uk/vane-pumps.html
www.jbj.co.ukRkJQdWJsaXNoZXIy NzQyNjQ=