1. General data 2. Starter installation method • • Customer Project A) ENGINE DATA B) APPLICATION DATA 1. Type of starter 4. Existing pinion data Starter Specification Data Sheet Maker Model Bore (mm) Stroke (mm) Number of cylinders Number of ring gear teeth Sense of rotation (CW/CCW) (engine - viewed from flywheel end) Sense of rotation (CW/CCW) (starter - viewed from pinion end) Firing speed (rpm) Breakaway torque (N·m) Fuel system (diesel, NG, DF) COUPLING FLANGE SAE J542 (1) Specify type (1, 2, 3, 4 or 5): 1. If there is any coupling dimension not according to SAE J542, specify below or provide drawing: BRACKET (2) CRADLE (2) 2. If the installation method is not according to SAE J542, please provide bracket or cradle drawing • diameter ‘A’.............................................. mm • diameter ‘B’.............................................. mm • diameter ‘C’.............................................. mm • angle ‘1’.................................................... º • angle ‘2’.................................................... º • angle ‘3’.................................................... º • front distance ‘D’...................................... mm • max. nose dim. ‘E’.................................... mm Brand and model Complete reference Nº (see nameplate) Type (pneumatic/electric/hydraulic) 3. Existing starter data PNEUMATIC (1) HYDRAULIC (2) MARINE PROPULSION GENSET POWER PLANT GENSET OFF-SHORE MINING FIRE PUMP OTHERS (specify) 2. Intended application MINIMUM STARTING ATTEMPTS AVAILABLE TANK CAPACITY 3 (m) AVAILABLE MAX. TANK PRESSURE (MPa) 3. Starting requirements SLOW TURN OR CRANKING PERIOD Number of engine turns Duration (sec) NFPA 20 SECTION 11.2.5 (FIRE PUMPS) OTHERS (specify) 4. Special starting requirements Please specify 5. Certification requierements ENGINE 3D MODEL (starter side sorrounding + ring gear) ENGINE SPECIFICATION SHEET RING GEAR DRAWING (with teeth data and tooth chamfer details) PHOTO OF EXISTING STARTER AND PINION C) OTHER REQUIREMENTS Number of teeth Normal modul or DP Tip diameter (ØF) (mm) Inner diameter (ØG) (mm) Base tangent length 2 teeth (H) (mm) (1) (2) New & Retro Fit (Air and hydraulic) 17 www.jbj.co.uk/air-starters #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=