4.5 6.4 7.0 9.6 11.5 14.1 16.0 28.2 GHP2 Series 23.7 21.1 17.9 20 22 26 33 39 44 52 78 87 GHP3 Series 71 61 3 Displacement (cm /rev) 1.4 2.1 2.8 3.5 4.1 5.2 6.2 7.6 9.3 11.0 GHP1 Series 13.8 35.2 Gear Pumps GHP Series Product Range The following items are also available: » reversibile pumps (field ROTATION "R") »pumps with independent driving systems (field OPTION "T" or "RA"). GHPseries hydraulic gear pumps Marzocchi GHP series gear pumps are produced in three different groups. Within each of them, the different displacements (between 1.4 and 87 cm3/rev) are obtained using different width of the gears. Different flanges, shafts, inlet and pressure ports are available. 7 www.jbj.co.uk/gear-pumps.html #DriveLineHarmony Contact jbj Techniques technical office for assistance in selection of correct pump for your application, telephone: +44 (0)1737 767493, email: info@jbj.co.uk Range between -10°C and +120°C. In the range between -10°C and +80°C maximum pressures P1, P2 and P3 are possible as per the product table; beside that P1 should not be exceeded. "VV"Version suitable for fluid at high temperatures. "ST"Version suitable for fluid at high or low temperature. Special Versions For special uses are also available: "V"Version suitable for fluid at high temperatures. Range between -10°C and +150°Cwithmaximumpressure 20 bar Range between -40°C and +120°C. In the range between -10 °C and +80°C maximum pressuresP1, P2 and P3 are possible as per the product table; beside that P1 should not be exceeded. "H"Version suitable for fluid at low temperature. Range between -40°C and +80°C. In the range between -10 °C and +80°C maximum pressures P1, P2 and P3 are possible as per the product table; beside that P1 should not be exceeded. “TR”Version suitable for inlet pressure up tomax. 6 bar absolute. The above descriptions are to be specified in the SEALfield of the ordering code.
RkJQdWJsaXNoZXIy NzQyNjQ=