Gear Pumps GHP2A Series Inlet and outlet standard ports are machined in compliance with threaded port with O-ring seal in truncated housing SAE J1926/1 (ISO 11926-1). Accessories supplied with the standard pump: key (code 522067). Mounting flange 82-2 (A) in compliance with SAE J744c. 26 OUTLET INLET GHP2A-D-13 9.6 13.7 280 295 310 4000 49.5 100 ⁷⁄ -14 UNF 1¹⁄ -12 UNF Type Displacement Flow at Maximum Pressure Maximum Dimensions GHP2A-D-30 21.1 30.1 230 245 260 2200 58.5 118 ⁷⁄ -14UNF 1¹⁄ -12 UNF GHP2A-D-37 25.5 36.4 210 225 240 1800 62 125 ⁷⁄ -14 UNF 1¹⁄ -12 UNF 1500 rev/min P P P Speed L M d D I 2 3 3 cm /rev litres/mim bar bar bar rpm mm mm GHP2A-D-6 4.5 6.4 280 295 310 4000 45.5 92 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-9 6.4 9.1 280 295 310 4000 47 95 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-10 7.0 10.0 280 295 310 4000 47.5 96 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-12 8.3 11.8 280 295 310 4000 48.5 98 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-16 11.5 16.4 280 295 310 4000 51 103 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-20 14.1 20.1 260 275 290 3200 53 107 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-22 16.0 22.8 260 275 290 2800 54.5 110 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-25 17.9 25.5 260 275 290 2500 56 113 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-34 23.7 33.7 230 245 260 2000 60.5 122 ⁷⁄ -14 UNF 1¹⁄ -12 UNF GHP2A-D-50 35.2 50.2 160 175 190 1800 69.5 140 ⁷⁄ -14 UNF 1⁵⁄ -12 UNF GHP2A-D-40 28.2 40.1 200 215 230 1800 64 129 ⁷⁄ -14 UNF 1¹⁄ -12 UNF www.jbj.co.uk/gear-pumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=