Gear Pumps GHP1A Series Accessories supplied with the standard motor: key (code 522070). Mounting flange 50-2 (A-A) in compliance with SAE J744c. Standard ports are machined in compliance with threaded port with O-ring seal in truncated housing SAE J1926/1 (ISO 11926-1). 15 www.jbj.co.uk/gear-pumps.html #DriveLineHarmony OUTLET INLET GHP1A-D-2 1.4 2.0 270 290 310 6000 42 81 ⁹⁄ -18 UNF ³⁄ -16 UNF 1500 rev/min P P P Speed L M d D I 2 3 3 cm /rev litres/mim bar bar bar rpm mm mm Type Displacement Flow at Maximum Pressure Maximum Dimensions GHP1A-D-3 2.1 2.9 270 290 310 6000 43 83 ⁹⁄ -18 UNF ³⁄ -16 UNF GHP1A-D-5 3.5 4.9 270 290 310 5000 45 87 ⁹⁄ -18 UNF ³⁄ -16 UNF GHP1A-D-6 4.1 5.9 270 290 310 4000 46 89 ⁹⁄ -18 UNF ³⁄ -16 UNF GHP1A-D-7 5.2 7.4 260 275 290 3500 47.5 92 ⁹⁄ -18 UNF ³⁄ -16 UNF GHP1A-D-9 6.2 8.8 260 275 290 3000 49 95 ⁹⁄ -18 UNF ³⁄ -16 UNF GHP1A-D-4 2.8 3.9 270 290 310 5000 44 85 ⁹⁄ -18 UNF ³⁄ -16 UNF GHP1A-D-11 7.6 10.8 230 245 260 3500 51 99 ³⁄ -16 UNF ⁷⁄ -14 UNF GHP1A-D-13 9.3 13.3 210 225 240 3000 53.5 104 ³⁄ -16 UNF ⁷⁄ -14 UNF GHP1A-D-20 13.8 19.7 180 195 210 2000 60 117 ³⁄ -16 UNF ⁷⁄ -14 UNF GHP1A-D-16 11.0 15.7 200 215 230 2500 56 109 ³⁄ -16 UNF ⁷⁄ -14 UNF
RkJQdWJsaXNoZXIy NzQyNjQ=