www.jbj.co.uk/electromagnetic-clutches.html 4 #DriveLineHarmony INDUSTRIAL CORP OGURA 60.33 ID 3 x 0.190 holes 55.58 80004265* 271.16 taper ⁵⁄ 12/66 180.98 80.5² 46.86 ID 4 x ³⁄ 3.125 2 x ³⁄ 80004332 1355.82 spline - 12/100 315.98 134.87 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ¹⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 60.33 ID 127.00 80003931* 271.16 spline - 12/66 180.98 113.50 101.6 ID 4 x ³⁄ 3.125 2 x ³⁄ 4 x ¹⁄ 13UNC 2B 97.54 OD 146.05 60.33 ID 127.00 80002712* 271.16 1 ¹⁄ (x 2) 12/66 180.98 113.50 101.6 ID 4 x ³⁄ 3.125 2 x ³⁄ 4 x ¹⁄ 13UNC 2B Static Key Voltage Overall Overall Output Mounting GrooveWidth Hub I/OLockup Field Field Part Bore 39.88 OD 2 x 0.68 slots 80001708* 271.16 1 ¹⁄ (x 2) 12/66 209.04 94.996 50.04 ID 0.597/36° - 2 x ³⁄ 120.65 145.03 OD 4 x 0.50 slots Torque Way &Watt Diameter Length Hub Side Flange Side /Output Hub Bolt Bolts Mount Bolt Number ID 127.00 OD 80005215** 949.07 1.75 ³⁄ 24/85 294.89 134.87 69.85 ID 4 x ⁷⁄ 3.750 2 x ¹⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 (Nm) (inches) (V/W) (mm) (mm) Pilot (mm) Pilot (mm) Bolt Holes (in) (inches) (inches) (inches) PCD(mm) 80002327* 1355.82 1.75 ³⁄ 12/100 315.98 134.87 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ¹⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 97.54 OD 146.05 8000 Series Mobile Clutch Dimensions (metric) 97.54 OD 6 x 0.250 holes 61.90 60.33 ID 80002657* 271.16 1 ¹⁄ (x 2) 12/66 180.98 113.50 82.55 ID 4 x ³⁄ 3.125 2 x ³⁄ 6 x ⁷⁄ slots 120.65 80002309* 542.33 1.75 ³⁄ 12/68 261.11 118.36 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ³⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 80004243* 542.33 spline - 12/68 261.11 118.36 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ³⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 80005158 1355.82 spline - 12/100 315.98 134.87 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ¹⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 97.54 OD 80004331* 542.33 1.25 ⁵⁄ 12/68 261.11 118.36 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ³⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 219.96 OD 80004333 1355.82 1.25 ⁵⁄ 12/100 315.98 134.87 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ¹⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 80002328 1355.82 1.75 ³⁄ 24/100 315.98 134.87 69.85 ID 127.00 OD 4 x ⁷⁄ 3.750 2 x ¹⁄ 8 x ³⁄ 16UNC x ⁵⁄ 158.75 80005180* 1355.82 spline - 12/100 315.98 141.22 81.92 OD 127.00 OD 8 x M10 3.996 2 x ¹⁄ 8 x ⁷⁄ 16-2B x 1 180.98 95.25 ID 80004213* 2033.73 spline - 12/170 381.00 131.76 152.40 OD 8 x 1/2 4.750 2 x 3/8 8 x ⁷⁄ 16-2B x 1 180.98 152.40 OD *24V version is also available **Only 24V version is available. Burnishing. To achieve full torque, new clutches need to have an initial wear-in period. Depending upon the inertia and speed, the wear-in period can be anywhere from 30 to 100 engagements. Burnishing should be undertaken at a reduced rpmand at a reduced clutch load. For high inertia loads do not cycle the clutchmore than 4 times per minute. Electromagnetic Clutches Mobile Clutch Weights & Measurements (Metric)
RkJQdWJsaXNoZXIy NzQyNjQ=