Mechanical Power Transmission Disc Couplings SXCS-6 Performance Data 18 SXCS-6 Type Industrial Coupling The SXCS Type is the standard 6 bolt coupling with two hubs, two mounting rings, two disc packs and a split spacer designed for ease of installation and maintenance. Custom spacer lengths can be specified for special applications. The coupling has two flex planes (one at each disc pack) allowing it to accommodate parallel misalignment by the angular misalignment in each disc pack. This configuration will also accommodate axial misalignment within the specified limits. Note 1 indicates: Operating speed must be equal or less than permissible speed which is limited by the weight and critical speed of the spacer. 2 indicates: Couplings as manufactured can accommodate maximum speeds as listed. Higher speeds up to the value shown as 'Bal' require special balancing. 3 indicates: The maximum bores shown are for cylindrical or taper shafts with keys. For other type of connections contact jbj Techniques Limited technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk 4 indicates: Weight is given for a complete coupling with minimum BSE and maximum bores. 5 indicates: Axial misalignment is given for two disc packs. 6 indicates: Angular misalignment is given for one disc pack. Features » Unitized disc packs » Infinite life if properly aligned » Torsionally rigid without any back lash » No need for lubrication or maintenance » No wearing parts and high resistance to harsh environmental conditions » Disc packs can be replaced without moving equipment. » For larger sizes, refer to SXCST couplings, see page 20. (Close Coupled Split Spacer) www.jbj.co.uk/disc-couplings.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=