Mechanical Power Transmission Disc Couplings SU-6 Performance Data 10 SU-6 Type Industrial Coupling The SU Type coupling is a 6 bolt single flex plane coupling which consists of two hubs and one disc pack kit. It is only suitable for the specified axial and angular misalignment and does not accommodate parallel misalignment. It is often combined with solid shafts to make floating shaft couplings. See Page 28 for a picture of an SXFS type floating shaft coupling. Note * indicates: Operating speed must be equal or less than permissible speed. 2 indicates: Couplings as manufactured can accommodate maximum speeds as listed. Higher speeds listed as 'Bal' require special balancing. 3 indicates: The maximum bores shown are for cylindrical or taper shafts with keys. For splines and other bore types, contact jbj Techniques Limited technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk 4 indicates: Weight is given for a complete coupling with maximum bores. 5 indicates: Axial misalignment is given for one disc pack. 6 indicates: Angular misalignment is given for one disc pack. There is no parallel misalignment for the SU Type. Features » Unitized disc pack. » Infinite life when properly aligned. » Torsionally rigid without any back lash. » No need for lubrication or maintenance. » No wearing parts and high resistance to harsh environmental conditions. » Larger sizes are available upon request. www.jbj.co.uk/disc-couplings.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=