Concentric AB-BIROT PWRPAK-2011-6 6 Example BDRC23 04 080 080 2 A 1 1 1 A 1 1 A Your Options 1 2 3 4 5 6 7 8 9 10 11 12 13 BI-ROTATIONAL POWER PACK Adapter Pump Relief Valve 1 Relief Valve 2 Motor Term./Breather Mounting Start Switch Solenoid Valve Voltage Cord Sets Controllers Example Your Options Locations Fittings Reservoirs ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown to the right. 7 Order Code Mounting Options 1 Horizontal 2 Vertical 8 Order Code 3” Motor - Start Switch & Breather Location (viewed from reservoir end) 0 N/A 1 4.5” - ALWAYS IN LINE WITH THE TERMINALS 2* 3” - PAD B @ 6 O’CLOCK, START SWITCH @ 12 O’CLOCK, BREATHER @ 12 O’CLOCK 3* 3” - PAD B @ 6 O’CLOCK, START SWITCH @ 3 O’CLOCK, BREATHER @ 12 O’CLOCK 4* 3” - PAD A @ 6 O’CLOCK, START SWITCH @ 12 O’CLOCK, BREATHER @ 12 O’CLOCK 5* 3” - PAD A @ 6 O’CLOCK, START SWITCH @ 9 O’CLOCK, BREATHER @ 12 O’CLOCK 6 REMOTE (CUSTOMER MOUNTED) * 9 / 3 O’Clock from the chosen mounting pad. 9 Order Code Solenoid Valve Voltages 0 NONE 1 12 V (Spade Terminals) 2 115 V (1/2” Conduit w/Dual Wire Leads) 10 Order Code Cord Sets (w/115 VAC contactor start switch) 0 NONE A 8 FT B 12 FT 11 Order Code Handset Controller Options (10 FT) 0 None 1 POWER-UP/POWER-DOWN (MOTOR ONLY) 2 POWER-UP/POWER-DOWN (MOTOR AND 2POS/2WAY SOLENOID VALVE) 3 POWER-UP/POWER-DOWN (MOTOR AND 2POS/3WAY SOLENOID VALVE) 12 Order Code Fittings Options 0 None 1 TWO - 7/16-20 STRAIGHT 2 TWO - 7/16-20 90 DEGREE (facing reservoir) 13 Order Code Reservoir Options (breather hole located at closed end of reservoir) A 2 QT PLASTIC B 3 QT PLASTIC C 1 GAL PLASTIC * D 1.5 GAL PLASTIC * E 2.0 GAL PLASTIC * F 1 GAL STEEL G 1.5 GAL STEEL H 2.0 GAL STEEL * Contact factory for availability. 1 Order Code Adapter Options BDRDC 2 Relief Valves, 2 Check Valves BDRSCV 2 Relief Valves, 1 Check Valve, 1 Normally Closed 2-Position 2-Way Solenoid Release Valve BDRSCP 2 Relief Valves, 1 Check Valve, 1 Check Valve Plug BDRDC23 2 Relief Valves, 2 Check Valves, 1 Manifold w/2-Position 3-Way Solenoid Valve 2 Order Code Pump Options 03 0.048 in.3/rev. - GC 04 0.065 in.3/rev. - GC 08 0.129 in.3/rev. - GC 3 Order Code Relief Valve 1 Options (PSI) * _ _ _ 0 Fill in 3 digits. * Must be less than a 4:1 ratio for P.O. check valves to pilot open. 4 Order Code Relief Valve 2 Options (PSI) * _ _ _ 0 Fill in 3 digits. * Must be less than a 4:1 ratio for P.O. check valves to pilot open. 5 Order Code Motor Options 0 None 1 3” - 12 V 2 TERMINAL 2 4.5” - 12 V 2 TERMINAL 3 * 1 HP, 3 PH, 50/60 HZ, 208-230/460 VAC, TENV, 2850/3450 RPM 4 * 1 HP, 3 PH, 50/60 HZ, 208-230/460 VAC, TEFC, 2850/3450 RPM 5 * 1 HP, 1PH, 60 HZ, 115/208-230 VAC, TENV, 3450 RPM 6 * 1 HP, 1PH, 50/60 HZ, 115/208-230 VAC, TEFC, 2850/3450 RPM 7 * 1 HP, 3PH, 50/60 HZ, 208-230/460 VAC, TENV, 1425/1725 RPM 8 * 1 HP, 1 PH, 60 HZ, 115/208-230 VAC, TENV, 1725 RPM 9 AC FLANGE ADAPTER (NEMA C, 56 Frame) * All AC motors are rated for 30 minute operation. 6 Order Code 4.5” Motor - TERMINAL, START SWITCH & BREATHER LOCATIONS (AS VIEWED FROM RESERVOIR END) 0 N/A A PAD B @ 6 O’CLOCK, TERMINALS @ 12, BREATHER @ 12 B PAD B @ 6 O’CLOCK, TERMINALS @ 3, BREATHER @ 12 C PAD A @ 6 O’CLOCK, TERMINALS @ 12, BREATHER @ 12 D PAD A @ 6 O’CLOCK, TERMINALS @ 9, BREATHER @ 12 quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=