Concentric AB-W600 PUMPS-US-2011-7 7 Order Displacement P Q (To Port Approx. Wt. R S (To Port Approx. Wt. T Approx. Wt. N L (To Port Code + 0.26 Centerline) P Section Max. Centerline) R Section + 0.26 T Section + 0.26 Centerline) cm3 in3 [+ 0.010] kg. [lbs.] kg. [lbs.] [+ 0.010] kg. [lbs.] [+ 0.010] 030 3.0 0.183 68.3 42.8 2.27 61.9 25.4 1.26 50.9 1.12 92.24 66.9 [2.69] [1.69] [5.0] [2.44] [1.00] [2.77] [2.00] [2.4] [3.63] [2.63] 035 3.5 0.214 69.8 43.7 2.30 63.4 26.3 1.29 52.4 1.15 93.74 67.7 [2.75] [1.72] [5.1] [2.50] [1.04] [2.83] [2.06] [2.5] [3.69] [2.67] 040 4.0 0.244 71.3 44.4 2.32 64.9 27.0 1.31 53.9 1.17 95.24 68.4 [2.81] [1.75] [5.1] [2.56] [1.06] [2.88] [2.12] [2.6] [3.75] [2.69] 045 4.5 0.275 72.7 47.3 2.34 66.3 29.9 1.33 55.3 1.19 96.64 71.3 [2.86] [1.86] [5.2] [2.61] [1.18] [2.93] [2.18] [2.6] [3.80] [2.81] 050 5.0 0.305 74.2 47.3 2.37 67.8 29.9 1.35 56.8 1.22 98.14 71.3 [2.92] [1.86] [5.2] [2.67] [1.18] [2.97] [2.24] [2.7] [3.86] [2.81] 060 6.0 0.366 77.1 47.3 2.41 70.7 29.9 1.41 59.7 1.27 101.04 71.3 [3.04] [1.86] [5.3] [2.78] [1.18] [3.10] [2.35] [2.8] [3.98] [2.81] 070 7.0 0.427 80.0 47.3 2.47 73.6 29.9 1.46 62.6 1.32 103.94 71.3 [3.15] [1.86] [5.4] [2.90] [1.18] [3.21] [2.46] [2.9] [4.09] [2.81] 080 8.0 0.488 82.9 47.3 2.52 76.5 29.9 1.51 65.5 1.37 106.84 71.3 [3.26] [1.86] [5.6] [3.01] [1.18] [3.32] [2.58] [3.0] [4.21] [2.81] 100 10.0 0.610 88.7 49.0 2.62 82.3 31.6 1.61 71.3 1.47 112.64 73.0 [3.49] [1.93] [5.8] [3.24] [1.24] [3.54] [2.81] [3.2] [4.43] [2.87] 120 12.0 0.732 94.6 52.0 2.72 88.2 34.6 1.71 77.2 1.57 118.54 76.0 [3.72] [2.05] [6.0] [3.47] [1.36] [3.76] [3.04] [3.4] [4.67] [2.99] W600 MULTIPLE PUMPS The W600 offers multiple pump configurations up to 3 sections. Multiplepumpsprovidemultiple hydraulic functions from one power source at a significantly lower cost than separatepumps. Thedrawingsandchartsprovide dimensional information as well as shaft and coupling load information for W600 two and three sectionpumps. If the shaft loading, coupling, and section sequencerequirementsoutlined on pages 4 and 5 are met, W600 multiple pumps will exhibit the same performance as W600 single section pumps outlined on page 2 of this catalog. (For counterclockwise rotation, inlet and outlet are reversed.) DOUBLE SECTION / DUAL INLET TRIPLE SECTION / TRIPLE INLET Dimensions P & Q are for use with Flange Options 02 and 03. CW ROTATION INLET OUTLET Q P S R MAX. CW ROTATION P S Q T S R MAX. INLET OUTLET (For counterclockwise rotation, inlet and outlet are reversed.) Dimensions P & Q are for use with Flange Options 02 and 03. quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=