5 3,0 kW 0,5 - 5,5 L 1,0 - 12,0 L 4,5 kW STANDARD 2/2 SOFT START/STOP 2/2 PROPORTIONAL 2/2 OPTIONAL LOW NOISE WQ-PUMP 0,8 - 5,7 cm3 He1000 / He2000 / He2200 Oil reservoir The standard unit is equipped with a transparent plastic reservoir with 0.5-4.0 litre usable volume, or a 1.5-12.2 litre steel reservoir. The followingpages containmore information on the HE power range. If you have any questions, please do not hesitate to contact our local sales office or distributor, or any of our factories. Check valve Adaptors Three different adaptors with two alternative mounting directions: the smaller He1000 adaptor, the larger He2000 and He2200. AC Operation Flanges for 71/80/91/100 B14 AC motors permit the installation of motors rated at 0.25-4 kW/1500 rpmor 0.37-4 kW/2800 rpm. AC mounting only with HE 2000 adaptor. Motors DC motors,12/24/48 volt. Efficient motors with long service life, long service interval and low power consumption. Special noise reduced motors (LSM) available. Pump Pressure-balanced gear pumps of our own design are extr emelyeffi cient, with low noise. Special noise reduced pumps (WQ) available. Start switch Start switch with high IP protection class and silverplated contacts meets tough demands for a long, problem-free service life. Valves Screw-in cartridge valves with a standard cavity are available in 2/2, 3/2, or 4/2 versions. Cetop 2, Cetop 3, and additional cartridge valve blocks are available for up to 4 individual functions. Constant-flow regulator A built-in pressure-compensated flow regulator can be added, providing pressure compensated lowering speed between 2 and 17,5 lpm regardless of load. Relief valves Flushed low-profile non-blocking relief valves provide high security. One model covers the entire 50-250 bar setting range, and meets tough demands for dependability and life expectancy. quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=