Concentric AB-GC PMP-USA-2011-6 3 SHAFT OPTIONS Five shaft options are standard: 0.171-inch Tang, 1/2-inch diameter x 1 1/2-inch Extension, Flexible Coupling, Threaded End, and SAE Spline. Consult factory for other shaft options. OPTIONS DIMENSIONAL INFORMATION Pumps use one of two basic castings: One size for gear faces 04 through 16 and a slightly larger size for gear faces 20 to 32. See the drawings for details. Ø Ø FLANGE OPTIONS Standard options include three basic flanges: 4-Bolt with 1.78-inch Pilot, 2-Bolt SAE “AA” with 2-inch or 1.78-inch Pilot, and 2-Bolt SAE “A” with 3.25-inch Pilot. Consult factory for other flange requirements. Ø Ø Ø Ø Ø Order Code Mounting Flange Options 1 4-Bolt w/1.78” Pilot 2 2-Bolt SAE “AA” w/2.0” Pilot s 3 2-Bolt SAE “AA” w/1.78” Pilot 4 2-Bolt SAE “A” w/3.25” Pilot s 100-piece minimum order Order Code Mounting Flange Options 1 0.171” Tang 2 0.50” Diameter x 1.50” Extension, 1/8” Square Key s 3 Flexible Coupling s 4 Threaded End (Specify Thread) * 5 SAE Spline (Specify) s 100-piece minimum order * 9T, 20/40 DP standard with flange option 1, 2 & 3; 9T, 16/32 DP standard with flange option 4. Selected sizes available from stock. Consult factory. quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=