Concentric AB-F20/F30 PMP-2011-06 39 DRIVE SHAFTS SAE “B” STRAIGHT KEY Shaft No. 1: For F20, F2020 & FT20 Pumps 292.6 Nm (2590 in. lb.) torsional capacity.* SAE “C” STRAIGHT KEY Shaft No. 1: For F30, F3020, F3030 & FT30 Pumps 720.8 Nm (6380 in. lb.) torsional capacity.* SAE “B” INVOLUTE SPLINE Shaft No. 12: For F20, F2020 & FT20 Pumps 279.6 Nm (2475 in. lb.) torsional capacity.* SAE “C” INVOLUTE SPLINE Shaft No. 12: For F30, F3020, F3030 & FT30 Pumps 819.1 Nm (7250 in. lb.) torsional capacity.* SAE “B-B” INVOLUTE SPLINE Shaft No. 99: For F20, F2020 & FT20 Pumps 451.9 Nm (4000 in. lb.) torsional capacity.* * Applies to coaxial applications only. Consult representative if application requires greater capacity or has side loads. For shaft options not shown, contact factory for specific shaft information. Flat Root - Side Fit No. of Teeth - 13 Diametral Pitch - 16/32 Pressure Angle - 30° Flat Root - Side Fit No. of Teeth - 14 Diametral Pitch - 12/24 Pressure Angle - 30° Flat Root - Side Fit No. of Teeth - 15 Diametral Pitch - 16/32 Pressure Angle - 30° 22.22 (.875) 22.20 (.874) Dia. 31.75 (1.250) 31.70 (1.240) D. 1.52 (.06) 2.29 (.09) R. 41.15 (1.62) 33.32 (1.312) 26.97 Full (1.062) depth 6.356 (.250) Sq. x 25.40 (1.00) long key 25.07 (.987) 24.82 (.977) .76 (.030) .51 (.020) R. 47.63 (1.875) 33.02 Full depth (1.300) of keyway 7.93 (.312) Sq. x 31.75 (1.25) long key 35.31 (1.390) 35.06 (1.380) .76 (.030) R. 55.5 (2.185) 55.5 (2.185) 47.63 (1.875) 31.24 (1.23) 2.29 (.09) x 45° 41.15 (1.62) 12.7 (.50) 1.52 (.060) x 45° 33.32 (1.312) 45.97 (1.81) 38.10 (1.500) 12.7 (.500) quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=