Concentric AB-F20/F30 PMP-2011-06 37 ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description FT3030 FT3030 Series Double Thru Drive Pump Contact factory for other requirements. 3 (Standard Designation) Order Code Description C Standard Designation 4 (Front Cover) Order Code Description 4 SAE “C” 4-Bolt Mount 7 SAE “C” 2-Bolt Mount 8 SAE “C” 2/4-Bolt Combination Mount 5 (Inlet Port) Order Code Description E 2”, SAE 4-Bolt Split Flange EM 2”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) F 2.5”, SAE 4-Bolt Split Flange FM 2.5”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) G 3”, SAE 4-Bolt Split Flange GM 3”, SAE 4-Bolt Metric Split Flange (M16 x 2.0” threads) Y #30 SAE (2 1/2” - 12) Straight Thread Contact factory for other requirements. 6 (Displacements, Front Section) Order Code Description Order Code Description 18 - 58 cc/3.54 in. 3 32- 104 cc/6.30 in. 3 21- 68 cc/4.13 in. 3 35- 113 cc/6.88 in. 3 25- 80 cc/4.91 in. 3 40- 129 cc/7.86 in. 3 28- 91 cc/5.51 in. 3 45- 145 cc/8.84 in. 3 30- 97 cc/5.89 in. 3 50- 161 cc/9.82 in. 3 GPM @ 1200 RPM, 100 PSI 7 (Front Section Outlet Port) Order Code Description B 1”, SAE 4-Bolt Split Flange BM 1”, SAE 4-Bolt Metric Split Flange (M10 x 1.5” threads) C 1.25”, SAE 4-Bolt Split Flange CM 1.25”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) D 1.5”, SAE 4-Bolt Split Flange DM 1.5”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) V #16 SAE (1 5/16” - 12) Straight Thread W #20 SAE (1 5/8” - 12) Straight Thread X #24 SAE (1 7/8” - 12) Straight Thread Contact factory for other requirements. 8 (Displacements, Rear Section) Order Code Description Order Code Description 18- 58 cc/3.54 in. 3 32- 104 cc/6.30 in. 3 21- 68 cc/4.13 in. 3 35- 113 cc/6.88 in. 3 25- 80 cc/4.91 in. 3 40- 129 cc/7.86 in. 3 28- 91 cc/5.51 in. 3 45- 145 cc/8.84 in. 3 30- 97 cc/5.89 in. 3 50- 161 cc/9.82 in. 3 GPM @ 1200 RPM, 100 PSI Model Code for FT3030 Double Thru Drive Pumps EXAMPLE: (F3) - FT3030 - C- 4 - E- 18- B - 28 -X- 6 - A- 12- B -10- L Rear Section Outlet Port Special Seals Series Standard Designation Front Cover Inlet Port Displacements, Front Section Front Section Outlet Port Displacements, Rear Section Rear Mounting Pad Shaft Seal Drive Shaft Rear Coupling 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Design Designation Rotation 9 (Rear Section Outlet Port) Order Code Description B 1”, SAE 4-Bolt Split Flange BM 1”, SAE 4-Bolt Metric Split Flange (M10 x 1.5” threads) C 1.25”, SAE 4-Bolt Split Flange CM 1.25”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) D 1.5”, SAE 4-Bolt Split Flange DM 1.5”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) W #20 SAE (1 5/8” - 12) Straight Thread X #24 SAE (1 7/8” - 12) Straight Thread Contact factory for other requirements. 10 (Rear Mounting Pad) Order Code Description 1 SAE “A” 2-Bolt Rear Mounting Pad 6 SAE “B” 2/4-Bolt Rear Mounting Pad 8 SAE “C” 2/4-Bolt Rear Mounting Pad 11 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None 12 (Drive Shaft) Order Code Description 1 SAE “C” Straight Keyed, 1.25” Dia., 1.875” Ext. 12 SAE “C” 14-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 13 (Rear Coupling) Order Code Description B SAE “B” Coupling C SAE “C” Coupling 14 (Design Designation) Order Code Description 10 Standard 15 (Rotation) Order Code Description L Counterclockwise Rotation R Clockwise Rotation quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=