Concentric AB-F20/F30 PMP-2011-06 35 HALEX-F20/F30 PMP-USA-2010-09 10 (Rear Mounting Pad) Order Code Description 1 SAE “A” 2-Bolt Rear Mounting Pad 6 SAE “B” 2/4-Bolt Rear Mounting Pad Note: SAE “A” rear mounting pad is available with GT30 - 41st design. Contact factory for information. 11 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None 12 (Drive Shaft) Order Code Description 1 SAE “B” Straight Keyed, .875” Dia., 1.312” Ext. 12 SAE “B” 13-Tooth Spline, Flat Root-Side Fit 21 SAE “BB” Straight Keyed, 1” Dia., 1.5” Ext. 99 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 13 (Rear Coupling) Order Code Description A SAE “A” Coupling B SAE “B” Coupling 14 (Design Designation) Order Code Description 10 Standard 15 (Rotation) Order Code Description L Counterclockwise Rotation R Clockwise Rotation Model Code for FT2020 Series Double Pumps EXAMPLE: (F3)- FT2020- W- 2 - E- 13- T - 21 - V- 1 - B - 11- A -10- L Rear Section Outlet Port Special Seals Series Mount Type Front Cover Inlet Port Displacements, Front Section Outlet Port Displacements, Rear Section Rear Mounting Pad Shaft Seal Drive Shaft Rear Coupling 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Design Designation Rotation ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description FT2020 FT2020 Series Double Thru Drive Pump 3 (Mount Type) Order Code Description W Wet Mounting Flange (pilot diameter sealing and provides for option double shaft seal) 4 (Front Cover) Order Code Description 1 SAE “A” 2-Bolt Mount 2 SAE “B” 2-Bolt Mount 4 SAE “C” 4-Bolt Mount (Contact Factory) 6 SAE “B” 2/4-Bolt Combination Mount 8 SAE “C” 2/4-Bolt Combination Mount 5 (Inlet Port) Order Code Description E 2”, SAE 4-Bolt Split Flange EM 2”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) F 2.5”, SAE 4-Bolt Split Flange FM 2.5”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) Contact factory for other requirements. 6 (Displacements, Front Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 GPM @ 1200 RPM, 100 PSI 7 (Outlet Port) Order Code Description A .75”, SAE 4-Bolt Split Flange B 1”, SAE 4-Bolt Split Flange (M10 x 1.5” threads) BM 1”, SAE 4-Bolt Metric Split Flange (M10 x 1.5” threads) S #10 SAE (.875” - 14) Straight Thread T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. 8 (Displacements, Rear Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 GPM @ 1200 RPM, 100 PSI 9 (Rear Section Outlet Port) Order Code Description A .75”, SAE 4-Bolt Split Flange B 1”, SAE 4-Bolt Split Flange (M10 x 1.5” threads) BM 1”, SAE 4-Bolt Metric Split Flange (M10 x 1.5” threads) S #10 SAE (.875” - 14) Straight Thread T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=