Concentric AB-F20/F30 PMP-2011-06 15 ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description F2009 F2009 Series Double Gear Pump 3 (Mount Type) Order Code Description D Dry Mounting Flange (shorter length, single shaft seal) W Wet Mounting Flange (pilot diameter sealing and provides for optional double shaft seal) 4 (Front Cover) Order Code Description 2 SAE “B” 2-Bolt Mount 4 SAE “C” 4-Bolt Mount (contact factory) 6 SAE “B” 2/4-Bolt Combination Mount (wet mount only) 8 SAE “C” 2/4-Bolt Mount (contact factory) 5 (Front Section Inlet Port) Order Code Description C 1.250”, SAE 4-Bolt Split Flange CM 1.250”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) D 1.50”, SAE 4-Bolt Split Flange DM 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) E 2.0”, SAE 4-Bolt Split Flange EM 2.0”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) V #16 SAE (1 5/16” - 12) Straight Thread W #20 SAE (1 5/8” - 12) Straight Thread Contact factory for other requirements. 6 (Displacements, Front Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 7 (Front Section Outlet Port) Order Code Description B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread NOTE: Metric ports available, contact factory. Contact factory for other requirements. 8 (Displacements, Rear Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 6- 6 cc/.366 in. 3 16- 16 cc/.976 in. 3 8- 8 cc/.488 in. 3 19- 19 cc/1.159 in. 3 10- 10 cc/.610 in. 3 23- 23 cc/1.403 in. 3 11- 11 cc/.671 in. 3 27- 27 cc/1.647 in. 3 14- 14 cc/.854 in. 3 28- 28 cc/1.709 in. 3 9 (Rear Section Inlet Port) Order Code Description X No Rear Inlet Port (single inlet for double pump) Rear Inlet Port Options (dual inlet for double pump): S 6 cc, #10 SAE (7/8” - 14) Straight Thread T 8 cc, #12 SAE (1 1/16” - 12) Straight Thread V 19 cc - 28 cc, #16 SAE (1 5/16” - 12) Straight Thread A 16 cc - 19 cc, .750”, SAE 4-Bolt Split Flange B 23 cc - 28 cc, 1.00”, SAE 4-Bolt Split Flange NOTES: Split flange ports are not available for 6cc - 14 cc sizes. Metric ports available, contact factory. Model Code for F2009 Series Double Pumps EXAMPLE: (F3)- F2009- W- 2 - W-13- T - 23- X- A - X- 12- E- C - 10 - L Special Seals Series Mount Type Front Cover Front Inlet Port Displacements Front Outlet Port Displacements Rear Inlet Port Rear Outlet Port Drive Shaft Valve Options Relief Valve Setting 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Design Rotation Shaft Seal 10 (Rear Section Outlet Porting) Order Code Description Q 6 cc, #8 SAE (3/4” - 16) Straight Thread S 8 cc - 16 cc, #10 SAE (7/8” - 14) Straight Thread T 19 cc - 28 cc, #12 SAE (1 1/16” - 12) Straight Thread Y 16 cc - 19 cc, .500”, SAE 4-Bolt Split Flange A 23 cc - 28 cc, .750”, SAE 4-Bolt Split Flange NOTES: Split flange ports are not available for 6cc - 14 cc sizes. Metric ports available, contact factory. 11 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None 12 (Drive Shaft) Order Code Description 1 SAE “B” Straight Keyed, .875” Diameter, 1.312” Ext. 12 SAE “B” 13-Tooth Spline, Flat Root-Side Fit 21 SAE “BB” Straight Keyed, 1.00” Diameter, 1.50” Ext. 99 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 13 (Valve Options) ** Order Code Description A Tuneable Priority Flow Control Valve, Secondary Flow Loadable B Tuneable Priority Flow Control Valve, Secondary Bypass to Pump Inlet C Tuneable Priority Flow Control Valve w/Relief Valve on Priority Flow Only, Secondary Flow Loadable (> 4 GPM) CC Tuneable Priority Flow Control Valve w/Relief Valve on Priority Flow Only, Secondary Flow Loadable (< 4 GPM) D Load Sense Priority Flow Control, Priority Flow Relief Bypass to Pump Inlet E Pilot-Operated Relief Valve, Bypass to Tank External X No Valve Option ** Contact factory for availability and minimum quantity requirements for above valve options. 14 (Relief Valve Setting) Order Code Description Order Code Description A 69 BAR (1000 PSI) G 190 BAR (2750 PSI) B 103 BAR (1500 PSI) H 207 BAR (3000 PSI) C 121 BAR (1750 PSI) I 224 BAR (3250 PSI) D 138 BAR (2000 PSI) J 241 BAR (3500 PSI) E 155 BAR (2250 PSI) K 250 BAR (3750 PSI) F 172 BAR (2500 PSI) L 275 BAR (4000 PSI) 15 (Design Designation) Order Code Description 10 Standard 16 (Rotation) Order Code Description Omit Clockwise Rotation L Counterclockwise Rotation quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=