Concentric AB-F15 PMP-USA-2011-6 9 EXAMPLE: (F3)-F1515- W- 2 - C-19-B - D -25- A-12- A- 10- L Model Code for F1515 Ferra Series Tandem Pumps Special Seals Ferra Series Mount Front Cover Front Section Inlet Displacements Rear Section Inlet Displacements Rear Section Outlet Drive Shaft Shaft Seal Design Designation Rotation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Front Section Outlet Contact factory for single inlet applications. ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description Viton Seal F3 Standard Omit 2 (Series) Order Code Description F1515 F15 / F15 Ferra Series Tandem Pump 3 (Mount Type) Order Code Description Single Shaft Seal S Wet Mount (Double Shaft Seal) W 4 (Front Cover) Order Code Description SAE “A” 2-Bolt Mount (consult factory) 1 SAE “B” 2-Bolt Mount 2 SAE “C” 2/4-Bolt Combination Mount (consult factory) 8 5 (Front Section Inlet Port) Order Code Description 1.00”, SAE 4-Bolt Split Flange B 1.25”, SAE 4-Bolt Split Flange C 1.50”, SAE 4-Bolt Split Flange D 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) DM #16 SAE (1 5/16” - 12) O-Ring V #20 SAE (1 5/8” - 12) O-Ring W #24 SAE (1 7/8” - 12) O-Ring X Contact factory for other requirements. 6 (Front Section Displacements) Order Code Cm3/In3 Order Code Cm3/In3 19 19 cc/1.16 in.3 38 38 cc/2.32 in.3 23 23 cc/1.40 in.3 44 44 cc/2.68 in.3 25 25 cc/1.53 in.3 50 50 cc/3.05 in.3 28 28 cc/1.71 in.3 33 33 cc/2.01 in.3 7 (Front Section Outlet Port) Order Code Description .750”, SAE 4-Bolt Split Flange A 1.00”, SAE 4-Bolt Split Flange B 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) BM #10 SAE (.875” - 14) O-Ring S #12 SAE (1 1/16” - 12) O-Ring T #16 SAE (1 5/16” - 12) O-Ring V Contact factory for other requirements. 8 (Rear Section Inlet Port) Order Code Description 1.00”, SAE 4-Bolt Split Flange B 1.25”, SAE 4-Bolt Split Flange C 1.50”, SAE 4-Bolt Split Flange D 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) DM #16 SAE (1 5/16” - 12) O-Ring V #20 SAE (1 5/8” - 12) O-Ring W #24 SAE (1 7/8” - 12) O-Ring X Contact factory for other requirements. 9 (Rear Section Displacements) Order Code Cm3/In3 Order Code Cm3/In3 08 3.8 cc/.23 in.3 28 13.3 cc/.81 in.3 12 5.7 cc/.35 in.3 32 15.2 cc/.93 in.3 16 7.6 cc/.47 in.3 36 17.1 cc/1.04 in.3 20 9.5 cc/.58 in.3 24 11.4 cc/.70 in.3 10 (Rear Section Outet Port) Order Code Description .750”, SAE 4-Bolt Split Flange A 1.00”, SAE 4-Bolt Split Flange B 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) BM #10 SAE (7/8”-14) Straight Thread S #12 SAE (1-1/16”-12) Straight Thread T #16 SAE (1-5/16”-12) Straight Thread V 11 (Drive Shaft) Order Code Description SAE “B” Straight Keyed, .875” Diameter, 1.3125” Ext. 1 SAE “B” 13-Tooth Spline, Major Dia. Fit 11 SAE “B” 13-Tooth Spline, Flat Root-Side Fit 12 SAE “A” 11-Tooth Spline 15 SAE “A” 9-Tooth Spline 19 SAE “BB” Straight Keyed, 1.00” diameter, 1.50” ext. 21 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit 99 Contact factory for other requirements. 12 (Shaft Seal) Order Code Description Single Shaft Seal (30 PSI) A Double Shaft Seal (30 PSI) (W mount type only) B None C High Pressure (150 PSI) D 13 (Design Designation) Order Code Description Standard 10 Seal Between Sections 11 14 (Rotation) Order Code Description Counterclockwise Rotation L Clockwise Rotation R quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=