Concentric AB-F15 PMP-USA-2011-6 7 EXAMPLE: (F3)- F1509- W- 2 - C- 19- B - A -11- Q- 12- A- 10- L Model Code for F1509 Ferra Series Tandem Pumps Special Seals Ferra Series Mount Front Cover Front Sectio Inlet Displacements Front Section Outlet Displacements Rear Section Outlet Drive Shaft Shaft Seal Design Designation Rotation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Rear Section Inlet ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description Viton Seal F3 Standard Omit 2 (Series) Order Code Description F1509 F15 / W900 Ferra Series Tandem Pump 3 (Mount Type) Order Code Description Single Shaft Seal S Wet Mount (Double Shaft Seal) W 4 (Front Cover) Order Code Description SAE “A” 2-Bolt Mount (consult factory) 1 SAE “B” 2-Bolt Mount 2 SAE “C” 2/4-Bolt Combination Mount (consult factory) 8 5 (Front Section Inlet Port) Order Code Description 1.00”, SAE 4-Bolt Split Flange B 1.25”, SAE 4-Bolt Split Flange C 1.50”, SAE 4-Bolt Split Flange D 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) DM #16 SAE (1 5/16” - 12) O-Ring V #20 SAE (1 5/8” - 12) O-Ring W #24 SAE (1 7/8” - 12) O-Ring X Contact factory for other requirements. 6 (Front Section Displacements) Order Code Cm3/In3 Order Code Cm3/In3 19 19 cc/1.16 in.3 38 38 cc/2.32 in.3 23 23 cc/1.40 in.3 44 44 cc/2.68 in.3 25 25 cc/1.53 in.3 50 50 cc/3.05 in.3 28 28 cc/1.71 in.3 33 33 cc/2.01 in.3 7 (Front Section Outlet Port) Order Code Description .750”, SAE 4-Bolt Split Flange A 1.00”, SAE 4-Bolt Split Flange B 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) BM #10 SAE (.875” - 14) O-Ring S #12 SAE (1 1/16” - 12) O-Ring T #16 SAE (1 5/16” - 12) O-Ring V Contact factory for other requirements. 8 (Rear Section Inlet Port) Order Code Description 16 cc - 19 cc, .75”, SAE 4-Bolt Split Flange A 23 cc - 28 cc, 1”, SAE 4-Bolt Split Flange B 6 cc, #10 SAE (7/8”-14) Straight Thread S 8 cc - 16 cc, #12 SAE (1-1/16”-12) Straight Thread T 19 cc - 28 cc, #16 SAE (1-5/16”-12) Straight Thread V No Rear Inlet Port (Single Inlet for Double Pump) X Dual inlet for double pump. Split ange ports are not available for 6 cc - 14 cc sizes. Metric ports available, contact factory. 9 (Rear Section Displacements) Order Code Cm3/In3 Order Code Cm3/In3 6 6 cc/.366 in.3 16 16 cc/.976 in.3 8 8 cc/.488 in.3 19 19 cc/1.159 in.3 10 10 cc/.610 in.3 23 23 cc/1.403 in.3 11 11 cc/.671 in.3 27 27 cc/1.647 in.3 14 14 cc/.854 in.3 28 28 cc/1.709 in.3 10 (Rear Section Outlet Porting) Order Code Description 23 cc -28 cc, .750”, SAE 4-Bolt Split Flange A 6 cc, #8 SAE (3/4”-16) Straight Thread Q 8 cc - 16 cc, #10 SAE (.875” - 14) Straight Thread S 19 cc - 28 cc, #12 SAE (1 1/16” - 12) Straight Thread T 16 cc - 19 cc, .5”, SAE 4-Bolt Split Flange Y Contact factory for other requirements. 11 (Drive Shaft) Order Code Description SAE “B” Straight Keyed, .875” Diameter, 1.3125” Ext. 1 SAE “B” 13-Tooth Spline, Major Dia. Fit 11 SAE “B” 13-Tooth Spline, Flat Root-Side Fit 12 SAE “A” 11-Tooth Spline 15 SAE “A” 9-Tooth Spline 19 SAE “BB” Straight Keyed, 1.00” Dia. 21 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit 99 Contact factory for other requirements. 12 (Shaft Seal) Order Code Description Single Shaft Seal (30 PSI) A Double Shaft Seal (30 PSI) (W mount type only) B None C High Pressure (150 PSI) D 13 (Design Designation) Order Code Description Standard 10 Seal Between Sections 11 14 (Rotation) Order Code Description Counterclockwise Rotation L Clockwise Rotation R quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=