Concentric AB-F15 PMP-USA-2011-6 5 EXAMPLE: (F3)- F15- W- 2 - D- 19- B - 1- A - 12- A- 10- L Model Code for F15 Ferra Series Single Pumps Special Seals Ferra Series Mount Type Front Cover Inlet Port Displacements Outlet Port Rear Cover Shaft Seal Drive Shaft Port Locations Design Rotation 1 2 3 4 5 6 7 8 9 10 11 12 13 ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description F15 F15 Ferra Series Single Gear Pump 3 (Mount Type) Order Code Description Single Shaft Seal S W Wet Mount (Double Shaft Seal) 4 (Front Cover) Order Code Description SAE “A” 2-Bolt Mount (consult factory) 1 SAE “B” 2-Bolt Mount 2 SAE “C” 2/4-Bolt Combination Mount (consult factory) 8 5 (Inlet Port) Order Code Description 1.00”, SAE 4-Bolt Split Flange B 1.25”, SAE 4-Bolt Split Flange C D 1.50”, SAE 4-Bolt Split Flange DM 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) #16 SAE (1 5/16” - 12) O-Ring V W #20 SAE (1 5/8” - 12) O-Ring #24 SAE (1 7/8” - 12) O-Ring X Contact factory for other requirements. 6 (Displacements) Order Code Cm3/In3 Order Code Cm3/In3 19 19 cc/1.16 in.3 38 38 cc/2.32 in.3 23 23 cc/1.40 in.3 44 44 cc/2.68 in.3 25 25 cc/1.53 in.3 50 50 cc/3.05 in.3 28 28 cc/1.71 in.3 33 33 cc/2.01 in.3 7 (Outlet Port) Order Code Description A .750”, SAE 4-Bolt Split Flange 1.00”, SAE 4-Bolt Split Flange B BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) #10 SAE (.875” - 14) O-Ring S #12 SAE (1 1/16” - 12) O-Ring T #16 SAE (1 5/16” - 12) O-Ring V Contact factory for other requirements. 8 (Rear Cover) Order Code Description Standard Single Pump Rear Cover (no options) 1 9 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) Double Shaft Seal (30 PSI) (W mount type only) B None C D High Pressure (150 PSI) 10 (Drive Shaft) Order Code Description SAE “B” Straight Keyed, .875” Diameter, 1.3125” Ext. 1 Tapered Threaded (1.50” taper per foot) 5 Tapered Keyed/Threaded 7 (.625” - 18 UNC, 1.50” taper per foot) SAE “B” 13-Tooth Spline, Major Dia. Fit 11 SAE “B” 13-Tooth Spline, Flat Root-Side Fit 12 SAE “A” 11-Tooth Spline 15 SAE “A” 9-Tooth Spline 19 SAE “BB” Straight Keyed, 1.00” diameter, 1.50” ext. 21 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit 99 Contact factory for other requirements. 11 (Port Locations) Order Code Description Side Inlet / Side Outlet A Side Inlet / Rear Outlet (consult factory) B Rear Inlet / Side Outlet (consult factory) C Rear Inlet / Rear Outlet (consult factory) D 12 (Design Designation) Order Code Description Standard 10 13 (Rotation) Order Code Description Counterclockwise Rotation L Clockwise Rotation R quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=