Concentric AB-D SERIES PUMPS-US-2011-6 9 F3- D-2- V-20- S-V-20- S- 1-B- 10- R D Series Tandem Pump Order Code EXAMPLE: 2 3 4 5 6 7 8 9 11 12 13 Design Series 2nd Sec Outlet Port 2nd Sec Inlet Port 1st Sec Outlet Port 1st Sec Displacement Series Mounting Flange 1st Sec Inlet Port 2nd Sec Displacement Shaft Seals Rotation Seal Options 1 10 Drive Shaft Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Seal Options) Order Code Description F3 Viton Seal Omit Standard (Buna N) 2 (Series) Order Code Description D D Series Hydraulic Pump 3 (Mounting Flange) Order Code Description 1 SAE “AA” 2-Bolt w/2.00” Pilot 2 SAE “A” 2-Bolt 4 4-Bolt w/ 1.78” Pilot 4 (First Section Inlet Port) Order Code Description Q #8 SAE (3/4” - 16) Straight Thread S #10 SAE (7/8” - 14) Straight Thread T #12 SAE (1-1/16” - 12) Straight Thread V #16 SAE (1-5/16” - 12) Straight Thread Common inlet port available (contact factory). 5 (First Section Displacement Code) Order Code (cc / In3) 08 (3.8 cc / .232 in.3/rev.) 28 (13.3 cc / .813 in.3/rev.) 12 (5.7 cc / .348 in.3/rev.) 32 (15.2 cc / .930 in.3/rev.) 16 (7.6 cc / .465 in.3/rev.) 36 (17.1 cc / 1.043 in.3/rev.) 20 (9.5 cc / .581 in.3/rev.) 48 (22.9 cc / 1.395 in.3/rev.) 24 (11.4 cc / .697 in.3/rev.) Contact factory for other requirements. 6 (First Section Outlet Port) Order Code Description H #6 SAE (9/16” - 18) Straight Thread Q #8 SAE (3/4” - 16) Straight Thread S #10 SAE (7/8” - 14) Straight Thread T #12 SAE (1-1/16” - 12) Straight Thread V #16 SAE (1-5/16” - 12) Straight Thread 7 (Second Section Inlet Port) Order Code Description Q #8 SAE (3/4” - 16) Straight Thread S #10 SAE (7/8” - 14) Straight Thread T #12 SAE (1-1/16” - 12) Straight Thread V #16 SAE (1-5/16” - 12) Straight Thread Common inlet port available (contact factory). 8 (Second Section Displacement Code) Order Code (cc / In3) 08 (3.8 cc / .232 in.3/rev.) 28 (13.3 cc / .813 in.3/rev.) 12 (5.7 cc / .348 in.3/rev.) 32 (15.2 cc / .930 in.3/rev.) 16 (7.6 cc / .465 in.3/rev.) 36 (17.1 cc / 1.043 in.3/rev.) 20 (9.5 cc / .581 in.3/rev.) 24 (11.4 cc / .697 in.3/rev.) Contact factory for other requirements. 9 (Second Section Outlet Port) Order Code Description H #6 SAE (9/16” - 18) Straight Thread Q #8 SAE (3/4” - 16) Straight Thread S #10 SAE (7/8” - 14) Straight Thread T #12 SAE (1-1/16” - 12) Straight Thread V #16 SAE (1-5/16” - 12) Straight Thread 10 (Drive Shaft) Order Code Description 1 SAE “A” 5/8” Straight Keyed 2 .171”Tang Drive 3 Flex Coupling Drive 7 SAE “A”Tapered 8 .252”Tang Drive 9 SAE “A” 9 Tooth Spline 10 SAE “AA” Straight Keyed 11 SAE “AA” 9 Tooth Spline Contact factory for other requirements. 11 (Shaft Seals) Order Code Description A Single Shaft Seal B Double Shaft Seal w/ Weep Hole C Single Shaft Seal w/ Ball Bearing D High Pressure Single Shaft Seal E High Pressure Single Shaft Seal w/ Ball Bearing F High Pressure Inner Single Shaft Seal w/ Std. Outer 12 (Design Series) Order Code Description 10 Standard 11 Sealed Between Sections 13 (Rotation) Order Code Description R Clockwise Rotation L Counterclockwise Rotation quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=