Description These units are free standing clutches of the multiple plate, oil bath type. These clutches are particularly suited to arduous applications and are capable of withstanding high radial loads. The PFI 60 and PFI 120 are manufactured with input and output shafts. The PFI 60P and PFI120P are intended for hydraulic pump direct connection with the same pump adaptor flanges and couplings as on AM 230 - 450 pump drives which means the possibility to fit a large number of pumps with standard components. Clutches & Gearboxes Technical Data Oil Bath Clutches 1 PFI 60 Power curve P.T.O. selection is to be made by multiplying the net input power by the service factor: 1.0 for centrifugal pumps, 1.3 for hydraulic pumps, 1.5 for direct winch drives, 2.0 for crushers. The resulting power is to be below the line on the graph. PFI 120 Power curve P.T.O. selection is to be made by multiplying the net input power by the service factor: 1.0 for centrifugal pumps, 1.3 for hydraulic pumps, 1.5 for direct winch drives, 2.0 for crushers. The resulting power is to be below the line on the graph.
RkJQdWJsaXNoZXIy NzQyNjQ=