BV54 double pump 81 If the intake pressure is not zero bar, use the graph below to find the percentage correction factor to apply to the maximum speed Main operating data max pressure / hydraulic fluid Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol max pres. peak pres. (0,5 sec.max) Water-in-oil emulsion 250 200 150 100 50 0 BAR 3625 2900 2175 PSI 1450 725 0 2000 1600 1200 800 600 400 0 RPM Antiwear industrial hydraulic oil Syntetic fire resistant fluid Water glycol Water-in-oil emulsion 1800 1400 200 1000 max speed / hydraulic fluid (with 0 bar in the intake pipe) speed 67 69 73 75 dB(A) Sound level at 138 bar (2000 psi) 71 Shaft end cartridge V05-42 Oil viscosity: 25 c.St.(10W) Temperature: 45°C Inlet pressure: 0 BAR 0 100 150 200 input torque / pressure 0 725 1450 2175 2900 PSI 600 0 NM BAR 50 400 power / pressure KW 0 20 40 BAR PSI 0 725 1450 2175 2900 2200 rpm 1800 rpm 1500 rpm 1200 rpm 1000 rpm 600 rpm 135 0 HP 0 50 100 150 200 100 flow / pressure PSI l/min GPM 300 50 0 0 725 1450 2175 2900 1000 rpm 600 rpm BAR 79,2 39,6 0 0 50 100 150 200 150 1200 rpm 1500 rpm 1800 rpm 2200 rpm 100 26,4 13,2 81 27 200 200 60 52,8 80 90 108 54 250 66 10 30 50 70 1200 rpm 1500 rpm 1800 rpm max speed / intake pipe pressure % correction factor for the max speed 120% 115% 110% 105% 100% 95% 90% -2,9 -1,45 0 PSI 1,45 2,9 4,35 -0,2 -0,1 0 0,1 0,2 0,3 Intake pipe pressure (BAR) 0,4 5,8
RkJQdWJsaXNoZXIy NzQyNjQ=